M.1300.3506 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen M.1300.3506 is part of the YSM Brushless Servo Motors series and weighs 0.54 kg with an overall length of 108 mm. It provides a continuous torque of 0.2 Nm and a peak torque of 0.48 Nm, using an input voltage of 230 V. The motor features a shaft diameter of 8 mm and can handle axial and radial shaft loads of 3 kg and 10 kg, respectively.
Internal Product Review
The M.1300.3506 is a Kollmorgen YSM brushless servo motor that delivers 0.2 Nm continuous torque and 0.48 Nm peak torque. A 20 V/kRPM back EMF constant and 0.16 Nm/A torque constant support predictable tuning and efficient current-to-torque conversion. Low rotor inertia and a 24 VDC brake make this unit especially well suited for accurate positioning in light-duty motion systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The M.1300.3506 is a brushless servo motor manufactured by Kollmorgen for the YSM Brushless Servo Motors series. Designed for tightly controlled rotary motion, the motor provides a compact drive source for pick-and-place heads, small indexing tables, and other precision axes in industrial automation. It supports applications that require repeatable positioning and moderate operating speeds.
The electromagnetic section delivers a continuous torque of 0.2 Nm, providing stable shaft output under the rated thermal load. For short acceleration bursts, the drive can reach a peak torque of 0.48 Nm, allowing quick movements without requiring a larger frame. The torque constant is 0.16 Nm/A, so the controller can calculate shaft torque directly from current feedback. Generated back electromotive force scales at 20 V/kRPM, helping the inverter retain sufficient voltage margin at high speeds. A phase inductance of 22.3 mH shapes the current rise time and filters ripple, assisting the servo amplifier in maintaining smooth vector control. Additional electrical characteristics include a phase resistance of 18.8 Ω and compatibility with a 230 V input. The holding brake operates at 24 V DC and provides 0.157 Nm of static holding torque.
The motor weighs 0.54 kg, minimizing the added load on lightweight machine assemblies. The shaft can withstand axial loads up to 3 kg and radial loads up to 10 kg, supporting direct coupling to timing pulleys or miniature gears. Its 8 mm shaft diameter fits common clamping hubs, while the overall motor length of 108 mm supports installation in compact spaces. The rotor inertia is 0.000003 kg·m², enabling rapid changes in direction during short positioning cycles. During a loss of power, the internal brake holds the shaft in position and helps prevent unwanted movement on vertical axes.
