SLO-SYN430P1
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships Fast
The SLO-SYN430P1 stepping motor drive supports a supply voltage range of 24–36 V DC, a maximum input current of 4.0 A, and a chopping frequency of 20 kHz. Part of the SS2000 SLO-SYN Drives by Kollmorgen, it is designed for compatibility with M061–M112 motors and weighs only 1.5 pounds.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Kollmorgen SLO-SYN430P1 is a bipolar, two-phase stepper motor drive in the SS2000 SLO-SYN series.
Featuring a built-in IC translator, the drive is capable of full-step and half-step resolution, the flexibility of which is dependent on the needs of the system in terms of smoothness and positioning accuracy. It has step rates up to 10,000 steps/sec, meaning it can fit a lot of motion profiles, both slow and controlled, or make more rapid, dynamic movements. The chopping frequency is 20kHz and provides quiet and efficient current control. The drive has a nominal 28 V DC of operation and a supply voltage range of 24 to 36 V DC. It features an input current of up to 4.0 A, can be used in steady applications, and is thermally safe to use since its total power dissipation is 40 watts. The SLO-SYN430P1 can work with Kollmorgen stepper motors between M061 and M112 and can be used in 4-, 6-, or 8-lead configurations, but the motor inductance must be 0.55 mH or greater, and the motor resistance should be no more than 3.5 ohms.
This compatibility turns it into a flexible choice to an extensive range of mid-sized motor applications. The drive is physically small, 4.375 x 1.36 x 5.73 inches (111 x 35 x 146 mm), and has a weight of about 1.5 pounds (680 g). It can therefore fit into a space-limited panel or enclosure. Its operating range is between 32°F to 122°F (0°C to 50°C), and it can be stored over a range of temperatures between -40°F and 167°F. The SLO-SYN430P1 has a 95% non-condensing maximum humidity tolerance, so it can be relied upon to take the strain of challenging working environments.
Frequently Asked Questions about SLO-SYN430P1:
Q: What is the step rate capability of the SLO-SYN430P1?
A: The SLO-SYN430P1 supports step rates up to 10,000 steps per second, suitable for both slow, precise positioning and rapid motion applications.
Q: What types of motors can be used with the SLO-SYN430P1?
A: The SLO-SYN430P1 is compatible with Kollmorgen M061 through M112 stepper motors and supports 4-, 6-, or 8-lead configurations, as long as motor inductance is ≥0.55 mH and resistance ≤3.5 ohms.
Q: What is the power input range of the SLO-SYN430P1?
A: The SLO-SYN430P1 operates on 28 VDC nominal, with a supported input voltage range of 24 to 36 VDC and a maximum current of 4.0 A.
Q: What kind of motion resolution does the SLO-SYN430P1 offer?
A: The SLO-SYN430P1 offers full-step and half-step resolution, selectable based on system requirements for motion smoothness and accuracy.
Q: What are the environmental specs for the SLO-SYN430P1?
A: The SLO-SYN430P1 operates in 0°C to 50°C (32°F to 122°F), can be stored between -40°F and 167°F, and tolerates up to 95% non-condensing humidity.
