SR55200-2G617C Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The SR55200-2G617C servo drive has a rated current of 55 amps, a DIN rail mount connection type, and operates within a temperature range of -25°C to 70°C. Part of the SP Servostar Servo Drives series by Kollmorgen, it complies with IEC 60947-2 standards and features an IP20 enclosure protection.
Internal Product Review
The SR55200-2G617C servo drive is a robust motion control unit offering 55 Arms continuous current and RS-232 communication. Its PWM switching at up to 16 kHz ensures high-frequency precision. Ideal for demanding automation, it maintains thermal stability via integrated fan cooling and 2.5-inch airflow clearance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SR55200-2G617C is a 24.45 kW servo drive produced by Kollmorgen for motor control. It is intended for a continuous rated current of 55 Arms as well as 110 Arms of peak value and uses 230 V AC in the form of single or three phases. This servo drive is not affected by vibrations of 0.5 g or below and can be installed on sites up to 1000 m altitude above sea level.
The SR55200-2G617C servo drive features pulse-width modulation (PWM) for switching, in the frequency range between 8 and 16 kHz. Its form factor holds a ratio of 1.01 between the RMS and average values of current. The SR55200 servo drive utilizes an integrated fan for cooling to ensure the system remains efficient and thermally managed. A panel or chassis supports the drive which needs a 2.5-inch clearance at the top and bottom for air to flow properly. The range of analog inputs is from ±10 V with a 14-bit resolution for accurate commands and sends ±10 V with 12 bits of information for feedback of the signal. The SR55200 servo drive has a suitable operating range of 32°F to 113°F and it can be stored between -4°F to 158°F. Its interface works through a RS-232 port.
The SR55200-2G617C servo drive has a built-in fault relay that is designed to work at 1 A at 24 VDC that offer protection from events such as overvoltage, undervoltage, overtemperature, short-circuit and error in feedback. This unit operates well with moist conditions up to 90% RH without any corrosive gases or dust in the air. The SR55200 servo drive runs with a DC bus voltage of 325 VDC with output capability of 20 kVA at 113°F.
