SC1B10260 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The SC1B10260 is a single axis servo drive manufactured by Kollmorgen and is part of the SC Servostar Servo Drives series. It operates with an input power of 230 VAC, 3-Phase, has a current rating of 10 Amps, and uses a sine encoder for feedback. This unit weighs 3.21 kilograms and features a main input wire size of 12 AWG.
Internal Product Review
The SC1B10260 is a Kollmorgen single-axis servo drive suited for focused motion applications. Sine encoder feedback and 24 VDC logic power support precise command response and straightforward controls integration. A 230 VAC 3-phase input and 10 A current rating give the drive a well-balanced performance profile for dependable servo control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SC1B10260 is a servo drive manufactured by Kollmorgen within the SC Servostar Servo Drives series. As a digital drive unit, it regulates the torque, speed, and position of a connected servomotor in automated machinery and material-handling cells. Designed for cabinet mounting, the product integrates power conversion, control electronics, and diagnostic interfaces so a motion controller can command precise axis movement during repetitive or high-speed processes.
This model supports single-axis operation, allowing one motor to be driven per unit. Its continuous output reaches 10 A, which is the maximum line current the power stage can deliver without derating. The drive accepts a 230 VAC three-phase input, which reduces the required conductor size compared with an equivalent single-phase source. Control circuitry is energized separately by a 24 VDC logic supply, keeping feedback and communication functions active during mains power interruptions. Rotor position is measured through a sine encoder, enabling fine interpolation for smooth low-speed motion and accurate positioning. The connector screws are tightened to 2.25 lb-in for secure wiring, while the mounting bolts are tightened to 20 lb-in to prevent vibration from loosening the enclosure during operation.
The housing measures 256 mm in height and 140 mm in width, supporting installation in compact control cabinets. Airflow requires 12.7 mm of clearance on each side and 63.5 mm of clearance above and below the housing. Field wiring enters through terminals that accept 12 AWG conductors, providing adequate capacity for the drive’s electrical connections. The main ground stud is tightened to 12 lb-in to maintain a low-impedance protective ground connection. With a mass of 3.21 kg, the drive can be secured to a suitable mounting panel without additional structural bracing. Its cabinet-mounted arrangement also provides direct access to the wiring terminals and mounting fasteners when the specified service clearances are maintained.
