S7720F-NAF2-PA Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen S7720F-NAF2-PA is a S700 Servo Drive weighing 13 kilograms and measuring 386 mm in height, 190 mm in width, and 244 mm in depth. It has a rated input power of 50 kVA, operates at 208 to 480 volts, and features a dual channel STO safety capability. The device supports an 80 amp AC supply fuse and has a switching frequency of 8 kHz.
Internal Product Review
The S7720F-NAF2-PA is a Kollmorgen S700 servo drive with a 72 Arms rated current and a 208...480V voltage rating. Dual channel STO and an 8 kHz switching frequency support dependable high-response motion control in demanding systems. A strong choice for higher-power servo applications, especially with its 50 kVA rated input power.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The S7720F-NAF2-PA is a Kollmorgen drive in the S700 Servo Drives series. This unit interfaces between a plant’s AC mains and the motor windings, supplying controlled current so that industrial actuators follow commanded profiles for torque, speed, or position. Its integrated processor, fan-controlled thermal section, and surface coating option on the printed circuit boards allow deployment in automated packaging, material handling, and machining cells where vibration and airborne contaminants are present.
The drive delivers a continuous output of 72 Arms, a capacity sized for mid-to-high power servo motors that must respond quickly without saturation. It accepts a line range of 208 to 480 V three-phase power, enabling connection to standard factory distribution networks. Internal IGBTs commutate at 8 kHz, a switching rate that balances current ripple against thermal stress in the silicon. Source loading reaches 50 kVA at full rating, so feeder conductors and circuit breakers must be sized for that apparent power. When operating on a 400 V bus, resistive and magnetic losses total 1005 W at 400 V, and the integrated fan with an optional external brake resistor helps remove this heat.
Upstream protection is provided by an 80 A AC supply fuse, and the control section offers dual-channel STO inputs so machinery can achieve a monitored safe torque-off state without contactors. Acoustic output is held below 68 dB(A), supporting installation in production areas with regular nearby activity. With a mass of 13 kg, the enclosure can be panel-mounted without additional framing. Its 386 mm height, 190 mm width, and 244 mm depth fit within standard IEC cabinets while leaving space for the 10 Ω external brake resistor, the fan controller expansion card, and wiring associated with the specified 6 V residual voltage drop during dynamic braking.
