Product Description:

The S7720F-DNF2-S4 is a Kollmorgen drive from the S700 Servo Drives series. It acts as the regulated power interface between three-phase mains and a synchronous motor, delivering precisely shaped current so that axes in automated assembly, material handling, or converting lines follow commanded profiles without overshoot. By combining high-bandwidth current loops with integrated safety logic, the unit removes the need for discrete contactors and still fits into standard 300 mm-deep enclosures.

The drive accepts a line window of 208 to 480 V and is protected by an external fuse rated at 80 A. Under continuous duty, it supplies 72 Arms, while five-second peaks can rise to 140 A to accelerate large inertial loads. To sustain these levels, the input side must provide 50 kVA, and the switching devices dissipate 1005 W of heat that must be removed by cabinet airflow. Kollmorgen specifies a minimum motor inductance of 0.51 mH at 400 V so the current regulators remain stable, and the output stage introduces only a 6 V residual drop, leaving more voltage for the motor's back EMF. These electrical figures allow the S700 to pair with high-torque servomotors on conveyors, winders, and indexing tables.

Nine safety inputs, six semiconductor outputs, and a dual-channel STO circuit enable category-oriented shutdown without external relays. The logic meets SIL CL 2 and reacts within 5 ms, which reduces interruption after emergency-stop events. Communication with higher-level PLCs is handled through DeviceNet, and an optional expansion card drives the internal fan controller for additional cooling. The drive is available with standard or coated PCBs, and conformal coating helps guard the electronics against humidity and dust. The overall construction carries an IP20 rating for integration inside closed control cabinets.