4.95 based on 202 reviews

🙶 We have never had a problem in the almost 20 years we have dealt with Wake. We would recommend them to any... 🙷

S7720A-FBF2-PM Kollmorgen

Ask for Availability

Preparing your secure checkout page...

The Kollmorgen S7720A-FBF2-PM is an S700 Servo Drive with a rated input power of 50 kVA and a rated current of 72 Arms. Part of the S700 Servo Drives series, it includes dual channel STO capability and features IP20 protection. The drive weighs 13 kg, operates at a voltage rating of 208 to 480 V, and produces a maximum noise emission of 68 dB(A).

Warranty
Wake Industrial Warranty

Quote Request Form:

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The S7720A-FBF2-PM is a digital servo drive produced by Kollmorgen within the S700 Servo Drives series. It converts rectified line power into controlled three-phase output for synchronous or induction motors, delivering the position and velocity loops required for industrial automation cells. Integrated control functions, a safety stop interface, and support for secondary encoder feedback allow this single-axis module to fit inside OEM cabinets where space, wiring simplicity, and motion response are important. By combining power electronics, signal processing, and diagnostic functions, the drive replaces discrete amplifier cards and contactors, which helps reduce panel complexity.

Its power stage accepts three-phase input from 208 to 480 V and can continuously deliver 72 A rms, which corresponds to a nominal apparent power of 50 kVA at the DC link. A carrier setting of 8 kHz sets the switching pattern of the IGBTs, balancing dynamic response with conducted emission limits. The safety input provides dual-channel STO, which removes gate-drive energy for rapid motor de-energization. When the enable signal is removed, the inverter dissipates only 24 W, and the residual voltage drop is limited to 6 V, which helps minimize heat during regenerative operation. Secondary encoder ports supply 5 VDC at 300 mA, while a 3 A output is available for a holding brake. The integrated fan-controller expansion card works with the cold plate and coated PCB option to help maintain internal temperatures during up to 30 permitted switch cycles per hour without derating.

The housing is 190 mm wide and 244 mm deep, while the height reaches 386 mm, so the unit occupies less than one square foot of panel area. The chassis weighs 13 kg. An IP20 ingress rating means it must be mounted inside a cabinet, which simplifies airflow because no environmental sealing is built in. During operation, the cooling fans limit audible output to 68 dB(A), keeping sound levels within common industrial guidelines for continuous exposure.

Depth
244 mm
Expansion Card
Fan controller
Height
386 mm
Holding Brake Current
3 A
Noise Emission Max
68 dB(A)
Option Detail
Coldplate and coated PCBs
Output Disabled Loss
24 W
Permitted Switch Cycles
30 1/h
Product Type
S700 Servo Drive
Protection Rating
IP20
Rated Current
72 Arms
Rated Input Power
50 kVA
Residual Voltage Drop
6 V
Secondary Feedback Current
300 mA
Secondary Feedback Supply
5 VDC
STO Capability
Dual channel STO
Switching Frequency
8 kHz
Voltage Rating
208...480V
Weight
13 kg
Width
190 mm

Frequently Asked Questions about S7720A-FBF2-PM:

Q: What is the rated output current capacity of the S7720A-FBF2-PM drive?

A: The S7720A-FBF2-PM servo drive has a rated current of 72 Arms, enabling support for high-power motors.

Q: What voltage range does the S7720A-FBF2-PM support for operation?

A: This servo drive is rated for an input voltage range of 208 to 480 volts, supporting a wide range of industrial power supplies.

Q: What type of STO capability does the S7720A-FBF2-PM provide?

A: The S7720A-FBF2-PM features dual channel Safe Torque Off (STO) capability for added functional safety requirements.

Q: What cooling and protection features does the S7720A-FBF2-PM include?

A: Cooling on the S7720A-FBF2-PM is supported by a coldplate option and coated PCBs, enhancing thermal management and reliability.

Q: What is the maximum number of switch cycles allowed per hour for the S7720A-FBF2-PM?

A: The permitted number of switch cycles for the S7720A-FBF2-PM is 30 per hour, defining the drive’s operational switching limits.


Internal Product Review

  • ‘‘The S7720A-FBF2-PM is a Kollmorgen S700 servo drive with a 72 Arms rated current and a 208 to 480V input range. Dual-channel STO and IP20 protection support dependable integration in controlled industrial cabinets. An 8 kHz switching frequency adds crisp drive response, making the drive a strong choice for demanding motion applications.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo