S74802-SNF2-F2 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The S74802-SNF2-F2 servo drive from Kollmorgen is part of the S700 Servo Drives series and has a rated input power of 35 kVA. It features a rated current of 48 Arms and operates with a voltage rating of 208 to 480 V. The unit measures 386 mm in height, 190 mm in width, and 244 mm in depth, and has a weight of 13 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The S74802-SNF2-F2 is a digital servo drive built by Kollmorgen as part of the S700 Servo Drives series. Designed for cabinet installation, the module converts incoming three-phase mains into a regulated output that follows motion commands from a higher-level controller. Its role in industrial automation is to supply fast current loops and safety functions so that permanent-magnet servo motors can execute precise positioning, synchronized line shafts, and dynamic tension control across packaging, converting, and material-handling systems.
Electrical performance is anchored by a rated output of 48 Arms, allowing medium-frame motors to accelerate quickly without saturation. The power section accepts a wide mains span of 208–480 V, so the same hardware can be used on either 230 V or 460 V plant networks. During continuous operation, it may draw up to 35 kVA, and that figure guides breaker sizing and cabinet thermal design. Fast pulse-width modulation at 8 kHz minimizes motor acoustic whine and improves current-loop bandwidth. For functional safety, a dual-redundant shutdown path is provided; the integrated dual-channel STO disconnects gate signals within milliseconds to meet SIL-rated stop requirements.
The F2 fan module activates when internal heat sinks reach 65 °C, and with the fans disabled the electronics still dissipate only 24 W, reducing standby cabinet temperature rise. The fan controller occupies the second option slot identified as an F2 board and is monitored by the drive. Acoustic output peaks at 62 dB(A), permitting placement near workstations without exceeding typical factory noise limits. Control electronics, I/O, and the fan circuit are powered from an auxiliary 24 V DC supply, so the main bus can be de-energized during service. A cast chassis keeps total mass to 13 kg while providing rigidity over the 386 × 190 × 244 mm envelope.
Frequently Asked Questions about S74802-SNF2-F2:
Q: What is the rated current specification of the S74802-SNF2-F2 servo drive?
A: The S74802-SNF2-F2 features a 48 Arms rated current for reliable operation in high-power servo applications.
Q: What voltage range does the S74802-SNF2-F2 servo drive accept?
A: This model supports a voltage input range of 208 to 480 volts for compatibility with varied power systems.
Q: What type of internal cooling management does the S74802-SNF2-F2 offer?
A: A fan controller is provided as an expansion card on this unit, with the fan activating internally at 65 °C.
Q: What safety feature is included with the STO function on the S74802-SNF2-F2?
A: The S74802-SNF2-F2 has a dual channel Safe Torque Off (STO) capability for enhanced safety measures.
Q: What is the maximum noise emission level for the S74802-SNF2-F2 servo drive?
A: At maximum operation, noise emission from this unit is rated at 62 dB(A).
