Product Description:

The S70302-PBNANA digital servo amplifier is one of the various such amplifiers from Kollmorgen in the S700 series. This servo amplifier should only be operated when it is inside a closed control cabinet. The wiring for the product must be done using only copper wires that have a cross-section adhering to IEC 60204 standards. The product encompasses an overvoltage category III in accordance with EN 61800-5-1 specifications. The device must be used only as an integral safety component of electrical plants or machines. The unit must not be allowed to come in contact with plastic films, artificial fabrics and other such highly insulating materials.

This servo amplifier might have uncovered live sections during operation depending on its enclosure protection level. The capacitors in this product are likely to have dangerously high voltages for about eight minutes after the power supply is switched off. The unit must not be touched or opened during operation. The device has a rated input power of 2.2kVA for continuous operation. It has a maximum thermal dissipation of 20W when the output stage is disabled. The product has a weight of 4.4kg and a width of 70mm. The unit must be handled only by qualified personnel during transport, unpacking, installation and setup. The amplifier comes with one-year warranty support which becomes void if its housing is opened.

The S70302-PBNANA servo amplifier will have a very high temperature on its surface, which increases beyond 80°C during operation. It is essential to implement additional filter measures when the device is used in industrial, business, commercial or residential areas. The periodic overvoltage between the housing of the unit and the three phases should not increase beyond 1,000Vcrest. The voltage spikes between any two phases should not exceed 1,000V while the voltage spike between the housing and any one of the phases should not go beyond 2,000V. The S70302-PBNANA unit can be sent safely to the address of your choice.