S70301-NANANA-024 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen S70301-NANANA-024 is a servo drive in the S700 Servo Drives series. It features a peak output current of 9 Amps, rated input power of 2.2 kVA, and operates at a voltage rating of 208 to 480 Volts. The unit is equipped with EtherCAT and CANopen onboard, a single channel STO safety capability, and has dimensions of 70 mm wide, 345 mm high, and 243 mm deep.
Internal Product Review
The S70301-NANANA-024 is a Kollmorgen S700 servo drive with EtherCAT and CANopen onboard. A 2.2 kVA rated input power and 3 Arms rated current support stable, efficient axis control in standard motion applications. Single-channel STO and 9 A peak output current add practical safety coverage and strong transient response.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The S70301-NANANA-024 is a servo drive produced by Kollmorgen as part of the S700 Servo Drives series. This unit conditions three-phase AC power and delivers controlled voltage and current to a compatible motor, forming the central actuator interface in closed-loop motion control tasks across industrial automation. Integrated EtherCAT and CANopen communication are available on the base hardware, so axis coordination with a PLC is possible without extra option boards. This arrangement lets the drive manage torque, speed, and feedback handling within one control platform.
The DC link of the S70301 can tolerate up to 900 VDC, providing margin for transient line excursions. Under continuous load, the output stage delivers 3 Arms of current while its power section draws 2.2 kVA from the mains. Current is modulated by an IGBT bridge that switches at 8 kHz; when commanded to half carrier utilization, the effective output frequency rises to 16 kHz, which helps reduce audible noise and torque ripple. A minimum motor inductance of 7.4 mH at 400 V helps ensure stable current regulation. The drive frame measures 70 mm wide, 243 mm deep, and 345 mm high, with a mass of 4.4 kg, supporting dense multi-axis cabinet arrangements. Standard printed circuit boards are used in this variant.
During acceleration or transient load steps, the drive can supply a peak output of 9 A for 2 seconds before it returns to the continuous limit. Safe operation is assisted by a single-channel STO circuit and by a 6 A time-delay fuse that protects the DC link. The input voltage window of 208 to 480 V permits use on both low and high industrial mains while allowing up to 30 switch-on cycles per hour. Heat is extracted through the heat sink and fan, producing 70 W of loss at rated current and only 20 W when the drive is enabled but not commanding torque. No expansion card is installed, so the built-in fieldbus connectors remain free.
