SERVOSTAR-610 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen SERVOSTAR-610 is part of the S600 Servo Drives series and has a rated installed load of 7 kVA and a weight of 4 kilograms. It features a peak output current of 20 Arms and a rated output current of 10 Arms. The drive has a dissipation at rated current of 90 W and measures 275 mm in height, 70 mm in width, and 265 mm in depth without connectors.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SERVOSTAR-610 is a digital servo amplifier manufactured by Kollmorgen in the S600 Servo Drives series. It translates three-phase line power into controlled sinusoidal outputs for brushless servo motors, closing the torque, speed, and position loops commanded by a motion controller. By supervising feedback and drive status, it supplies the regulated actuation required for pick-and-place modules, packaging axes, and high-speed assembly systems. This operating role lets the amplifier support repeatable motion in automated equipment where stable response and accurate axis control are required throughout each duty cycle.
At continuous load, the drive delivers 10 Arms, while transient demands can be met with up to 20 Arms. A capability of 7 kVA indicates the apparent power that must be available in the cabinet supply network. Heat produced under full current equals 90 W, and the output waveform maintains a form factor of 1.01, indicating near-ideal sinusoidal current. The auxiliary bus draws 3 A when a motor brake is engaged and 1 A when no brake is present. Residual voltage drop across the power stage is limited to 5 V, helping preserve motor torque at low speeds. Inductive loading from 4 mH to 25 mH covers both compact rotary actuators and installations with extended motor leads, while a 20 kΩ input resistance to analog ground helps isolate reference signals. Quiescent dissipation is 15 W when the stage is enabled but idle.
The housing is 70 mm wide, 275 mm high, and 265 mm deep, so multiple units can mount side by side without exceeding typical enclosure depths. With a mass of 4 kg, the drive mounts directly to DIN rails or backplates without supplemental supports. The narrow enclosure helps keep adjacent wiring paths accessible, and the vertical layout leaves room for natural airflow across the aluminum case. During standby, the idle heat loss is removed by convection over the housing surfaces, which supports orderly panel integration without requiring added cooling hardware for basic installation.
Frequently Asked Questions about SERVOSTAR-610:
Q: What is the peak output current rating of the SERVOSTAR-610 servo drive?
A: The SERVOSTAR-610 can deliver a peak output current of 20 Arms, enabling it to handle demanding servo applications.
Q: What is the rated installed load capacity of the SERVOSTAR-610?
A: The rated installed load for the SERVOSTAR-610 is 7 kVA, supporting substantial motor loads in industrial environments.
Q: How much auxiliary supply current does the SERVOSTAR-610 require with and without a brake?
A: With an aux supply current of 3 A when using a brake and 1 A without a brake, this model fits various control setups.
Q: What are the minimum and maximum load inductance values supported by the SERVOSTAR-610?
A: The SERVOSTAR-610 has a minimum load inductance requirement of 4 mH and can support up to 25 mH max, allowing a range of motor types.
Q: What is the power dissipation at rated current for the SERVOSTAR-610 servo drive?
A: Dissipation at rated current for the SERVOSTAR-610 is 90 W, influencing cooling requirements during continuous operation.
