SERVOSTAR-603A-AS-PROFI Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen SERVOSTAR-603A-AS-PROFI is part of the S600 Servo Drives series and weighs 4 kg. The drive offers a rated output current of 3 Amps RMS with a peak of 6 Amps RMS and supports a rated installed load of 2 kVA. It features two 9-pin Sub-D Profibus ports and internal brake circuit power of 80 W.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SERVOSTAR-603A-AS-PROFI is a servo drive produced by Kollmorgen as part of the S600 Servo Drives series. The unit converts three-phase mains power into controlled current and voltage waveforms for brushless servomotors, enabling precise torque and speed regulation in automated packaging lines, material handling cells, and robotics. Fieldbus connectivity lets the drive act as an intelligent axis under centralized PLC control.
The drive’s rated output current is 3 A rms, which is suitable for continuous vector control on moderate-power axes, while its peak channel can deliver 6 A rms for short accelerations. Under rated load, the apparent power reaches 2 kVA, and the drive dissipates 40 W of heat that must be removed by panel airflow. The ±10 V interface has an analog input resistance of 20 kOhm, so upstream controllers are only lightly loaded. Two 9-pin Sub-D Profibus ports provide cyclic position or torque commands without extra gateways. The mechanical envelope is limited to a width of 70 mm, a height of 275 mm, and a depth of 265 mm, easing multi-axis rack layouts. Static loss in idle mode is 15 W, and the output bridge exhibits a 5 V residual drop across phases. The drive supports load inductances within the limits given below.
Dynamic energy is absorbed by an internal brake resistor rated at 80 W, allowing the module to dissipate regenerated power without external hardware. Motor windings connected to the S600 must present at least 12 mH of inductance to maintain current loop stability, yet they must not exceed 75 mH so voltage modulation stays within the bus capability. The sinusoidal output has a current form factor of 1.01, which means RMS and average currents are nearly identical and help reduce additional heating. With a mass of 4 kg, the drive integrates easily onto light machine frames and leaves cabinet space for auxiliary devices.
Frequently Asked Questions about SERVOSTAR-603A-AS-PROFI:
Q: What is the peak output current of the SERVOSTAR-603A-AS-PROFI servo drive?
A: The SERVOSTAR-603A-AS-PROFI provides a peak output current of 6 A rms for demanding load situations.
Q: How many Profibus ports does the SERVOSTAR-603A-AS-PROFI have and what type are they?
A: This drive offers two Profibus ports using 9-pin Sub-D connectors for seamless communication integration.
Q: What is the supported load inductance range for the SERVOSTAR-603A-AS-PROFI?
A: There is a minimum supported load inductance of 12 mH and a maximum of 75 mH for this model.
Q: What is the power rating of the internal brake circuit in the SERVOSTAR-603A-AS-PROFI?
A: The SERVOSTAR-603A-AS-PROFI has an internal brake circuit with a power rating of 80 W.
Q: What is the analog input resistance value of the SERVOSTAR-603A-AS-PROFI?
A: The analog input resistance on this drive is rated at 20 kOhm, ensuring compatibility with typical analog control signals.
