S64001 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen S64001 is a servo drive from the S600 Servo Drives series that supports a voltage range of 230 to 480 volts and has a current rating of 40 Amps rms. It features an IP20 enclosure protection and a continuous regeneration power of 6 kW. The drive weighs 19.5 kilograms, has a depth of 300 millimeters without connectors, and a rated installed load of 30 kVA.
Internal Product Review
The S64001 is a Kollmorgen S600 servo drive that impresses with a 40A rms current rating and support for 230...480V input. IP20 protection and an 8 kHz output stage frequency support clean cabinet integration and stable motor control. Continuous regen power of 6 kW is a standout advantage for demanding servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The S64001 servo amplifier is manufactured by Kollmorgen for the S600 Servo Drives series. It functions as a closed-loop power stage that translates controller commands into three-phase output for brushless servomotors, enabling position, speed, and torque regulation on packaging lines, pick-and-place modules, and material-handling axes. The drive is intended for cabinet installation in automated systems that require modular expansion and rapid handling of regenerated power. Its control architecture allows the connected motor to respond accurately to changing motion commands and operating loads.
The drive supplies a continuous motor current of 40 A rms with an output current form factor of 1.01, producing nearly sinusoidal waveforms. The IGBT bridge switches at 8 kHz, providing fine torque resolution while keeping audible switching noise within practical limits. Heat dissipation at full load is 400 W, and the drive can return up to 6 kW of regenerated power to the DC link. An external 15 Ω resistor can be connected when the regenerative load exceeds the internal capacity. The housing has an IP20 protection rating, so the drive must be installed inside a suitable enclosure. Analog reference lines have a 20 kΩ input resistance, while a 4 AT auxiliary fuse isolates the control supply from disturbances on the mains connection.
The housing measures 250 mm wide and 300 mm deep without connectors, while operation at idle dissipates 40 W. The supply system must accommodate an installed load of 30 kVA, and the residual voltage drop across the output devices does not exceed 5 V at the motor terminals. Line compatibility ranges from 230–480 V, allowing the drive to operate with several common industrial supply voltages without transformer tap changes. The unit weighs 19.5 kg, which permits secure installation on an appropriately rated cabinet panel. The AS electrical option routes power through spring-clamp terminals for firm conductor retention. Brake chopper connections are positioned beside the external regenerative resistor terminals, keeping the associated power wiring grouped within the cabinet.
