S61001-SE Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
35 Seconds
The Kollmorgen S61001-SE is part of the S600 Servo Drives series and has a current rating of 10 Amps rms with supported voltages from 230 to 480 Volts. The servo drive provides IP20 enclosure protection, an internal brake resistor of 33 Ohms, and features a SERCOS expansion module. It measures 275 mm in height, 70 mm in width, 265 mm in depth, and weighs 4 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The S61001-SE is a servo drive produced by Kollmorgen and positioned within the S600 Servo Drives series. As a drive, it interfaces between a motion controller and a synchronous or induction motor, modulating power to achieve commanded speed or torque in automated machinery. By converting the plant’s AC supply into precision-controlled output, the unit supports positioning, process speed, and duty-cycle repeatability across packaging lines, handling robots, and general machine tools.
The output stage delivers a continuous current of 10 A rms, allowing the drive to handle medium-frame motors without overheating. It accepts a wide mains window of 230 to 480 V, so a single model can be installed in both low- and high-voltage plants. Enclosure protection is rated at IP20, indicating finger-safe openings suited for cabinet installation where airflow is available. An output stage clock of 8 kHz sets the PWM switching frequency, and the higher rate helps reduce current ripple and audible noise in the motor. Power lost as heat is limited to 90 W at rated load, which helps with enclosure ventilation planning and thermal management.
The drive’s apparent power demand reaches 7 kVA, which is useful when sizing branch circuit protection and supply transformers. For dynamic deceleration, an internal brake stage can absorb up to 200 W through a built-in 33 Ω resistor, so many applications do not require an external brake module. Physical installation is simplified by a mass of only 4 kg, and the unit also fits densely packed multi-axis panels with a 70 mm width, 265 mm depth, and 275 mm height. The SERCOS expansion module provides deterministic fiber-optic communication, and the AS electrical option prepares the control interface for standard feedback devices. Continuous operation is permitted up to 85% relative humidity, while noise emission is held to 45 dB(A).
Frequently Asked Questions about S61001-SE:
Q: What is the current rating of the Kollmorgen S61001-SE servo drive?
A: The S61001-SE servo drive has a current rating of 10A rms, supporting moderate power requirements for servo applications.
Q: What voltage range does the S61001-SE accept for operation?
A: This model supports an input voltage range from 230V to 480V, accommodating common industrial power supplies.
Q: What level of enclosure protection does the S61001-SE feature?
A: The S61001-SE provides IP20 enclosure protection, which means it safeguards against solid objects larger than 12 mm, but is not resistant to liquids.
Q: How much internal brake power does the Kollmorgen S61001-SE offer?
A: An internal brake power rating of 200 W is provided on the S61001-SE, allowing for reliable handling of regenerative braking energy.
Q: What communication module is included with the S61001-SE servo drive?
A: This drive comes standard with a SERCOS expansion module for precise real-time communication in automation networks.
