S60301-PB Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen S60301-PB is part of the S600 Servo Drives series and is designed as a servo drive with a current rating of 3A rms and a peak output current of 6A rms. It supports input voltages from 230 to 480V and features 2 PROFIBUS ports using 9-pin Sub-D connectors. The drive operates with a maximum load inductance of 75 mH, a common-mode voltage max of 10 V, and has an instrument width of 70 mm.
Internal Product Review
The S60301-PB is a Kollmorgen S600 servo drive with a 3 A rms current rating and PROFIBUS expansion module for efficient motion control integration. Fast 62.5 µs current controller cycle and 250 µs position controller cycle give the drive a very responsive, well-tuned operating feel in demanding applications. A strong choice for automation systems that benefit from precise control and dependable fieldbus connectivity.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The S60301-PB is a servo drive manufactured by Kollmorgen for the S600 Servo Drives series. It supplies regulated three-phase power to a compatible motor, allowing an industrial controller to manage precise position, speed, and torque profiles for machinery axes. The unit is intended for cabinet installation and supports fieldbus networking, allowing multiple drives to coordinate motion in automated packaging lines, pick-and-place gantries, and material-handling cells. Its control architecture processes motor feedback and command signals continuously to maintain stable axis response as operating loads and motion demands change.
During continuous operation, the drive delivers a rated phase current of 3 A rms, while a peak current of 6 A rms is available for short acceleration periods. The internal current controller updates every 62.5 µs. The position loop is refreshed and the digital inputs are scanned every 250 µs, helping keep command processing and input response synchronized. Thermal losses reach 40 W at rated current, and enclosure cooling must also account for an additional 15 W of quiescent dissipation. Common-mode output is limited to 10 V, while the residual voltage drop between the DC link and motor terminals is 5 V. An output current form factor of 1.01 indicates that the motor current remains close to a sinusoidal waveform. The analog reference input has a resistance of 20 kΩ, which limits loading on the upstream signal source. Compatible motors may have line-to-line winding inductance from 12 mH to 75 mH, allowing standard servo motor windings to operate without external reactors.
The drive has a rated apparent power of 2 kVA, and its power section accepts a three-phase supply ranging from 230 to 480 V without tap changes. Communication and expansion use the PROFIBUS profile, which is implemented through two 9-pin Sub-D ports that support daisy-chain wiring. The unit is configured with the AS electrical option, leaving the front slot available for an additional feedback or safety module. Its mechanical width is 70 mm, allowing closely spaced installation with adjacent equipment in a control cabinet. Forced-air ventilation can remove heat from the housing when the required airflow and cabinet clearances are maintained.
