0190-A2460 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
17 Seconds
The Kollmorgen 0190-A2460 is part of the S600 Servo Drives series and features a Mini Combicon connector with 12 pins. This servo drive provides 14 digital inputs and 8 digital outputs, utilizing optocoupler isolation. Its control input voltage is 24 VDC with a control input current of 7 mA, and it supports a maximum data cable length of 50 meters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 0190-A2460 belongs to the S600 Servo Drives series manufactured by Kollmorgen. As a servo drive module, it interfaces with motion controllers to regulate motor torque, velocity, and position in automated machinery such as packaging lines and pick-and-place gantries. It conditions logic signals from the control system, distributes them to field devices, and returns status data. This real-time exchange allows production equipment to respond to process commands while maintaining coordinated motion across connected axes.
A front-mounted connector provides 12 pins in a compact Mini Combicon housing, simplifying field wiring where panel space is limited. The drive has 14 digital inputs for reading sensors, limit switches, and other control devices without requiring extensive external I/O hardware. The module also provides eight individually switched digital outputs that can source up to 500 mA per channel for relays, indicator lamps, and similar loads. All control paths are isolated from the power section by optocouplers, which help prevent ground loops and protect the logic circuits from high-energy transients. The inputs draw only 7 mA, and the control circuits operate from a 24 VDC supply. Supply wiring uses a cable with two 1 mm² conductors, while the data link uses a 22 × 0.5 mm² cable arrangement. A 4 AT external fuse limits fault current on the low-voltage side.
For deterministic motion control, signal transmission is supported over a 50 m shielded cable run. The drive completes output state changes in less than 10 ms, reducing lag between a control command and the response of a connected field device. Start commands are accepted with a maximum delay of 2 ms, supporting prompt activation during coordinated machine cycles. Network masters can readdress the module in as little as 4 ms when coordinating multiple axes. The control rail also supplies feedback LEDs that provide a visible indication of individual channel status. Shielding helps limit electrical interference along the data connection, while the specified timing supports synchronization between control events and machine movement.
