S4036M-CA Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
28 Seconds
The S4036M-CA is a S400 servo drive produced by Kollmorgen. It functions as a master module with a clock frequency of 8 kHz and is rated for 3 Amps RMS output current. The device measures 240 mm deep, 230 mm high, 100 mm wide, and weighs 3 kilograms. It offers IP20 enclosure protection and supports a voltage range of 115 to 230 Volts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The S4036M-CA servo drive is manufactured by Kollmorgen and belongs to the S400 Servo Drives series. It is intended to operate as the central amplifier in multi-axis systems, converting the shared DC link supply into three-phase outputs that command brushless servo motors. By synchronizing motor currents with reference signals, the drive supports precise positioning, speed regulation, and torque control tasks used in packaging lines, pick-and-place robots, and material handling equipment installed in compact control cabinets.
At the power stage, the drive accepts mains voltages from 115 to 230 V and is protected against excess energy by an overvoltage limit of 450 V. Current is regulated with a carrier clock of 8 kHz, yielding a near-sinusoidal output whose form factor is 1.01, so thermal loading on connected windings remains predictable. Under continuous duty, the amplifier supplies a rated phase current of 3 A rms while quiescent losses remain at 12 W. During acceleration, it can deliver up to 9 A rms. The internal control monitors load inductances between 12 mH and 75 mH to keep the current loop stable, and dissipation at full rating is 35 W. The module also functions as the master element that coordinates subordinate axis modules on the shared DC bus.
The housing is compact at 100 mm wide, 240 mm deep, and 230 mm high, with a mass of 3 kg that simplifies cabinet mounting. An IP20 enclosure provides finger-safe protection when the unit is installed inside a closed electrical panel. The shared DC bus can feed up to 7 kVA of installed servo load, and the master can supervise as many as 7 axis modules without additional controllers. Motor wiring must not exceed a line inductance of 75 mH and must not fall below 12 mH for proper current shaping. Overall standby consumption remains at the specified 12 W.
Frequently Asked Questions about S4036M-CA:
Q: What input voltage range does the S4036M-CA servo drive support?
A: The S4036M-CA is designed to operate with a voltage range of 115 to 230V.
Q: What is the peak output current for the S4036M-CA?
A: This servo drive can deliver a peak output current of 9 A rms.
Q: How many axis modules can be connected to the S4036M-CA servo drive?
A: The S4036M-CA supports connection of up to 7 axis modules.
Q: What is the enclosure protection rating of the S4036M-CA?
A: This model features enclosure protection rated at IP20.
Q: What is the clock frequency of the S4036M-CA servo drive?
A: The S4036M-CA has a clock frequency of 8 kHz, ensuring fast response times.
