SE10000-1H348H Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The SE10000-1H348H by Kollmorgen is part of the S200 Servo Drives series and has a rated power of 821 Watts with a rated speed of 1850 RPM. This unit features a continuous line current of 11.5 Amps DC and a peak torque of 14.21 Newton-meters. It uses an encoder for feedback and weighs 6.32 kilograms.
Internal Product Review
The SE10000-1H348H is a Kollmorgen S200 servo drive with encoder feedback and a 115 VAC input. Rated at 821 W with 4.24 N-m torque, this unit delivers smooth and confident motion control in precision drive systems. A 62.5 µs current loop update rate supports crisp dynamic response, making this drive an excellent choice for high-performance servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SE10000-1H348H is a Kollmorgen servo drive in the S200 Servo Drives series. Designed for small- to mid-frame brushless motors, the unit receives 115 VAC mains power, rectifies it, and modulates phase current so automated axes follow commanded motion profiles. In packaging, electronics assembly, and general material-handling applications, it acts as the power interface between a PLC motion card and the motor. High-speed control loops maintain accurate position, speed, or torque as operating demands change. This arrangement allows the drive to support controlled motion in indexing equipment, conveyors, and other automated systems that require repeatable motor response.
The drive delivers a continuous bus current of 11.5 A DC, allowing the connected motor to produce a continuous stall torque of 5.26 N-m without exceeding its normal thermal limits. It derives this output from a 160 VDC internal bus, providing voltage headroom for rapid acceleration. Current commands are refreshed every 62.5 µs in the current loop, while position calculations are updated every 500 µs to limit error during fast indexing moves. Within this control window, the amplifier can provide up to 821 W of mechanical power at a rated shaft speed of 1850 rpm. Continuous operation at that point corresponds to a rated torque of 4.24 N-m and keeps the device within its intended thermal range.
For short, high-demand moves, the amplifier can supply a peak line current of 34.5 A DC, allowing the attached motor to reach a peak torque of 14.21 N-m during dynamic positioning. Average operating current is limited to 10 A, balancing thermal load against the required duty cycle. The mechanical system uses a rotor with an inertia of 2.66 kg-cm², which supports responsive acceleration without introducing excessive load into the control loop. The unit has an overall mass of 6.32 kg, so it can be mounted in a suitable control cabinet without heavy structural bracing. Quadrature encoder feedback connects directly to the drive for closed-loop position and velocity control. The drive has no electrical option card installed, leaving its standard control configuration unchanged.
