S22460-VTS Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen S22460-VTS is a servo drive from the S200 Servo Drives series, offering a continuous output power of 8000 W at 240 VAC 3-phase and a peak output power of 16000 VA. It supports velocity and torque operation modes, feedback through SFD/Halls, and is rated for 120/240 VAC input with 24 ARMS continuous and 48 ARMS peak current ratings. The drive measures 213 mm in height, 96.4 mm in width, 192 mm in depth, and has a weight of 2.56 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The S22460-VTS is a servo drive produced by Kollmorgen as part of the S200 Servo Drives series. It is intended to regulate brushless servomotors in industrial automation where precise velocity or torque control is required. By modulating three-phase power to the motor windings, the unit converts AC line energy into controlled electrical output that maintains commanded speed or shaft torque under changing load conditions.
The drive delivers a continuous output of 8000 W when supplied from a 240 VAC three-phase line. Its inverter stage can sustain 24 ARMS of continuous current and tolerate up to 48 ARMS of peak current for rapid acceleration demands. A peak apparent power rating of 16000 VA indicates the short-term energy the drive can transfer to the motor without exceeding thermal limits. The 120/240 VAC for all current ratings input allows installation on either single-phase or three-phase utility services commonly found in machinery panels. Velocity and torque modes are selectable, so the same hardware can operate in speed or current control. Feedback support includes SFD, Halls, and incremental devices, while optional SynqNet or CAN cards extend compatibility to EnDat 2.1 encoders, sine encoders, and Comcoder formats. With no additional electrical option installed, the base model keeps the electrical layout simple in compact cabinets.
The upstream supply must be capable of 250 kVA to cover worst-case regeneration and inrush. For compact enclosures, the drive has a depth of 192 mm, a width of 96.4 mm, and a height of 213 mm, and the manufacturer recommends 19 mm of clearance above and below the unit for airflow. Shipping and mounting are simplified by a mass of 2.56 kg. During continuous duty at 3000 rpm and 40 °C, a matched motor can deliver 4000 W of mechanical shaft power. SynqNet and CAN option cards fit into an internal slot without changing the exterior dimensions.
Frequently Asked Questions about S22460-VTS:
Q: What is the continuous output power rating for the S22460-VTS drive?
A: The S22460-VTS servo drive provides a continuous output power of 8000 W when operating on 240 VAC three-phase input.
Q: What are the continuous and peak current ratings for the S22460-VTS?
A: This drive supports a continuous current of 24 ARMS and can handle peak currents up to 48 ARMS.
Q: What types of feedback support are included with the S22460-VTS servo drive?
A: The S22460-VTS is compatible with SFD and Hall effect feedback devices on all units.
Q: What input voltage does the S22460-VTS servo drive accept?
A: This product is rated for input voltages of 120 or 240 VAC across all supported current levels.
Q: Which functionality modes are offered by the S22460-VTS servo drive?
A: Velocity and torque control modes are both available for the S22460-VTS, enabling flexible motion control options.
