M.1017.2284 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen M.1017.2284 is a drive unit from the PIC900 Drives series and has a total of 5 actual slots, including 4 I/O module slots labeled 3, 4, 5, and 6. It measures 14.0 inches in height, 8.8 inches in length, and 9.0 inches in depth with modules. The unit uses a 64-pin female slot connector.
Internal Product Review
The M.1017.2284 is a Kollmorgen PIC900 drive rack with 5 actual slots and 4 dedicated I/O module positions. CSM/CPU slot labeling at 1/2 and I/O slot labeling at 3 through 6 support clean system layout and efficient service planning. A compact footprint with 64-pin female slot connectors makes this assembly a strong choice for organized control expansion.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The M.1017.2284 is a backplane chassis supplied by Kollmorgen within the PIC900 Drives series. The unit provides the physical framework that holds control, communication, and I/O cards for modular drive systems, allowing motion controllers and field wiring to be consolidated in a single enclosure. By allocating dedicated card positions for processing and machine interface modules, it simplifies maintenance and expansion in industrial automation cells.
The backplane offers five physical card positions. The combined controller position, identified as slots 1/2, accommodates the CSM and CPU controllers so that processing power and system bus management remain isolated from field wiring. The remaining four locations accept discrete or analog I/O modules, allowing the drive rack to be scaled according to the machine signal count. Each card engages a 64-pin female connector, which carries power, address lines, and high-speed serial links between the board set and the PIC900 bus. With modules installed, the chassis measures 9.0 inches (229 mm) deep, permitting flush mounting inside standard 12-inch control cabinets without obstructing door clearance.
The vertical profile reaches 14.0 inches (355 mm), leaving space above the rack for cable ducts while still fitting beneath typical 16-inch panel rails. Its overall length is 8.8 inches (224 mm), so multiple chassis can be placed side by side when larger systems require additional axes or safety relays. The I/O card positions carry the addresses 3, 4, 5, and 6, simplifying wiring documentation because each terminal block number corresponds to its slot index. Heavy-gauge side walls made from plated steel maintain mechanical alignment and protect the installed cards from movement inside the cabinet. Earth bonding points connect the assembly to the control cabinet ground, providing a direct path for fault current and helping control electrical noise within the modular drive system.
