PDD0410165_KT Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen PDD0410165_KT is a servo drive from the PD Servostar Servo Drives series with an axis count of 2 and a continuous current of 10 Arms per axis. It operates at a bus voltage of 48 VDC, features a 12-bit analog input resolution, and has dimensions of 163.2 mm in height, 116.3 mm in depth, and 71.5 mm in width. The drive uses a 24 VDC logic power supply and provides an encoder supply voltage of 5 VDC with 300 mA per interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PDD0410165_KT is a dual-axis servo drive manufactured by Kollmorgen for the PD Servostar Servo Drives series. Installed in multi-motor machines, it conditions low-voltage DC bus power and supplies phase-modulated current to paired servo motors. The drive accepts command and feedback signals so that motion controllers can regulate position, speed, and torque with closed-loop precision. Its dual-axis arrangement reduces the number of separate drive modules required in equipment that operates two coordinated motors.
This model controls two axes from a directly connected 48 VDC bus. Each axis can deliver a continuous line current of 10 Arms per axis, allowing moderate-power rotary or linear actuators to run simultaneously without an external amplifier. Command values arrive through an analog interface with 12-bit resolution, providing 4,096 discrete levels for velocity or torque setpoints. Drive logic is optically isolated from the power stage and supplied by 24 VDC, so controller I/O and digital feedback remain active when the main bus is de-energized. Encoder ports provide 5 V at up to 300 mA per channel to power incremental or commutation encoders. Motor current ripple is limited by a 32 kHz modulation layer that operates over the gate switching and supports smoother torque production. The housing has a width of 71.5 mm and a depth of 116.3 mm, allowing multiple drives to share a compact DIN rail.
The thermal safeguard disconnects the output when the heat sink temperature reaches 80 °C, protecting semiconductor junctions during stalled loads or inadequate airflow. Power devices switch at 16 kHz, providing sufficient control bandwidth while keeping magnetic losses acceptable. Saturation begins near a 92.5% duty cycle, which establishes the usable PWM headroom before linearity degrades. The overall height is 163.2 mm, so the unit fits standard 200 mm enclosures while leaving clearance for cable bends. Peak current equals the continuous current rating for bursts lasting up to 500 ms, eliminating the need for a separate overload curve when evaluating short operating intervals.
