Product Description:

The MTC526SC1-M1C1 is a servo motor built by Kollmorgen within the MTC Servo Motors series. Designed for closed-loop positioning and speed regulation in industrial automation, it converts drive commands into controlled rotary motion for tooling, material handling, and packaging axes. Its design suits applications that require repeatable starts, stops, and speed changes during automated cycles. This makes it suitable for axes that must respond quickly to command changes while maintaining stable speed control.

The motor combines high-speed operation with an integrated holding brake for controlled axis performance. An electrically released holding brake operates on 24 VDC and draws a control current of 0.30 ADC; this current is supplied directly by a SERVOSTAR 600 drive so no separate power module is required. The brake’s inertial load is limited to 0.00014 kg·m², which helps keep added acceleration demand low in the drive train. Under rated conditions, the rotor can spin to 6000 RPM, allowing high cycle throughput in indexing stations. When power is removed, the brake can secure loads up to 19.5 N·m of static holding torque, which is suitable for many medium-frame vertical axes. A long stack length increases magnetic volume for higher torque density without enlarging the mounting envelope, and the straight key interface simplifies torque transmission to a pulley or coupling.

The motor is sealed for use where dust and occasional water exposure are present. The housing carries an IP65 sealing grade that prevents dust ingress and tolerates low-pressure water jets, while an internal shaft seal further protects the front bearing. A frame diameter of 130 mm matches standard IEC motor mounts. Cable routing is handled by a right-angle rotatable connector, which allows the exit direction to be adjusted without changing the machine layout. Output torque is delivered through a straight shaft with key, providing positive drive engagement for chain wheels or belt pulleys.