Product Description:

The MSM100-14-602-S-0KA is a brushless servo motor produced by Kollmorgen within the MSM Brushless Servo Motors series. Designed to deliver controlled rotary motion in packaging equipment, pick-and-place heads, and other automated axes, this motor converts commanded current from a digital drive into precise shaft torque and speed. Its compact construction, combined with electronic commutation, allows tight position control while eliminating maintenance associated with brushes. By coupling directly to gear stages or belt pulleys, the unit supplies the mechanical power needed to index loads with repeatable accuracy in industrial machinery.

The motor delivers a continuous torque of 14 in-lb, allowing the drive to support a sustained load without thermal derating. Its rated speed reaches 6000 rpm, so indexing cycles can be completed quickly when the control loop commands maximum speed. Bearing life is supported by a permissible radial side load of 34 kg at top speed, protecting the shaft and couplings under belt tension. A square face with a 90 mm flange follows common IEC dimensions, simplifying attachment to gearboxes. Power is transmitted through a hardened steel shaft with a diameter of 14 mm, ensuring a proper fit with keyed hubs.

Precise alignment during installation is provided by a pilot diameter of 100 mm and a concentric bolt circle with a diameter of 80 mm. These features maintain accurate centering between the motor and driven components. The threaded mounting holes accept M5 × 0.8 mm fasteners and provide 12.5 mm of engagement depth, offering adequate clamping force without exceeding the housing thickness. Internal feedback exits through a 17-pin circular connector that supports the single-turn, high-resolution encoder used for closed-loop positioning. A 30 mm shaft extension with a factory-cut keyway mates with compatible couplings. The ST-60 shaft material resists wear during repetitive start-and-stop operation.