SE10200-000000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen SE10200-000000 servo drive is part of the MC Servostar Servo Drives series and has a continuous power rating of 3.6 kVA at 325 VDC. It features a rated output current of 10 ARMS and peak output current of 20 ARMS, with speed regulation accuracy of 0.01 percent. The drive weighs 9.9 pounds and supports encoder feedback.
Internal Product Review
The SE10200-000000 is a Kollmorgen MC Servostar servo drive with 3.6 kVA continuous power at 325 Vdc and 10 ARMS rated output current. Fast control response from a 62.5 µs current loop update and 0.01% speed regulation supports precise motion performance. A 20 ARMS peak output current makes the servo drive a strong choice for demanding axis control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SE10200-000000 is a servo drive produced by Kollmorgen within the MC Servostar Servo Drives series. As a drive controller, it supplies regulated three-phase power to a matched servo motor, executes current, velocity, and position loops in real time, and interfaces with plant controllers through discrete I/O and encoder feedback. In industrial automation, it is installed in control cabinets to deliver precise torque, speed, and positioning for machinery such as pick-and-place robots, feeders, and indexing tables.
The drive can deliver 3.6 kVA of continuous power from a 325 VDC bus and supplies a nominal phase current of 10 A RMS. For short accelerations, it can produce a peak current of 20 A RMS. Pulse-width modulation is generated at 16 kHz, a switching rate that minimizes motor ripple while limiting switching losses. The inner current loop refreshes every 62.5 µs, allowing tight torque control, while the velocity and position loops update every 250 µs and 500 µs, respectively, to maintain commanded trajectories. Commutation data arrives through an encoder interface, and a remote encoder input has an impedance of 100 Ω for differential signals. Control wiring draws up to 20 mA per digital input. Each digital output can source 60 mA, and the fault relay is rated for 1 A at 24 VDC, enabling direct connection to interlock circuits.
The maximum commutation frequency reaches 400 Hz, supporting high-speed motors without loss of phase accuracy. Under full electrical load, the unit dissipates 120 W internally, so cabinet airflow must remove this heat to prevent derating. Speed regulation is maintained within 0.01%, which keeps conveyor or spindle velocity nearly constant despite load changes. The drive has a total mass of 9.9 lb, simplifying panel mounting without requiring heavy support brackets.
