KCM-E200-0000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen KCM-E200-0000 is part of the M Goldline Servo Motors series. This servo motor features air cooling by convection and has a drive rated voltage of 400 to 480 V. It has dimensions of 300 x 100 x 201 mm and a weight of 4.1 kg, with an IP20 protection class.
Internal Product Review
The KCM-E200-0000 is a Kollmorgen M Goldline servo motor with air convection cooling and IP20 protection. Rated for 400/480 V and offering 2000 Ws storage capacity, the motor is an excellent choice for stable and efficient servo performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KCM-E200-0000 is a power interface unit produced by Kollmorgen for the M Goldline Servo Motors series. Installed alongside servo drives, it conditions incoming mains energy and buffers it during regeneration events, supporting consistent motion in automated machinery such as packaging gantries and inspection axes. The module fits the Goldline drive platform and matches the mechanical and electrical interfaces used throughout the product line. Its design provides DC-link energy storage and protection for operation inside industrial control cabinets.
This unit accepts a bus supply derived from three-phase lines at 400/480 V, so it connects to common plant voltages without step-up transformers. The housing measures 300 × 100 × 201 mm, allowing cabinet layouts to reserve a narrow footprint beside matching drives. A mass of 4.1 kg simplifies panel mounting and limits the static load placed on DIN rails or backplates. Electrical parts are shielded by an enclosure rated at IP20, which prevents finger contact with live conductors but requires installation inside a closed cabinet. Heat is removed by natural convection air cooling, eliminating the need for forced-air equipment and associated fan maintenance.
The internal capacitor bank stores 2000 Ws, enabling the drive system to absorb regenerative surge energy during deceleration and release it during the next acceleration cycle. Operation is permitted from 0 °C to 40 °C, while storage is permitted from -10 °C to 65 °C. Relative humidity may reach 85% during operation and 95% while the unit is de-energized, provided that condensation does not occur. Four mounting bosses with holes measuring 4 × 6.5 mm allow the module to be attached securely to a backplate. These temperature, humidity, and mounting limits apply during storage and continuous operation inside automated production equipment.
