MW0750128 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen MW0750128 is part of the ICD Ironcore Direct Drives series and has an overall length of 127.3 mm and width of 105.20 mm. This unit features a bottom mount with 4 holes of 5.70 mm diameter and a counterbore depth of 7.95 mm. The magnet way mass is rated at 18.9 kg/m and the magnetic air gap measures 22.94 mm.
Internal Product Review
The MW0750128 is a Kollmorgen ICD Ironcore Direct Drives magnet way with a compact profile and a controlled 22.94 mm magnetic air gap. A four-hole bottom mount with M5 x 0.8 threading supports straightforward installation in precision linear assemblies. The 18.9 kg/m magnet way mass gives the unit a solid, high-quality feel for consistent direct-drive performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MW0750128 is a magnet track segment produced by Kollmorgen for the ICD Ironcore Direct Drives series. In an ironcore linear motor assembly, this segment forms the passive path of permanent magnets that the moving coil travels along, generating thrust for high-force positioning stages. The component is used in gantries, pick-and-place axes, and similar automated equipment that requires accurate linear movement. Its factory-machined mounting base allows machine builders to create long, continuous direct-drive runs without using rotary transmissions, gearboxes, or other mechanical conversion systems.
The segment has a nominal length of 128 mm and an actual overall length of 127.3 mm, providing clearance at the butt joints between adjacent sections. Four bottom mounting holes, each with a diameter of 5.70 mm, are positioned on 32.0 mm centers. Each hole has an M5 × 0.8 thread with an 8.0 mm depth, allowing the rail to attach directly to ground mounting plates without adapter strips. The counterbores have a depth of 7.95 mm, which allows the cap screws to sit flush with the surrounding surface. A 9.35 mm counterbore diameter provides clearance around the screw heads and prevents interference near the coil’s magnetic gap. The 82.00 mm mounting-hole span supports symmetrical clamping across the 105.20 mm overall width and helps establish a consistent mounting position for adjoining track sections.
The magnetic circuit uses magnets that are 75 mm wide and arranged to provide a 22.94 mm operating air gap when a matching forcer is installed. The track has a linear mass of 18.9 kg/m, which must be supported by the machine frame across an extended axis. Its overall stack thickness is 30.00 mm, while the profile rises 8.23 mm above the mounting surface to preserve a low vertical installation height. The closely fitted ends allow adjacent blocks to be positioned with minimal spacing, supporting consistent alignment over long travel distances. Flush mounting hardware also keeps the fasteners away from the moving forcer and leaves the active magnetic path unobstructed during operation.
