Product Description:

The MCH075-512-01 magnet way assembly is manufactured by Kollmorgen and is supplied under the ICD Ironcore Direct Drives series. In a direct-drive linear stage, this component provides the stationary magnetic field needed for controlled motion. The field interacts with the moving coil to deliver the thrust, speed, and positional accuracy required for automated processes.

Across its length, the magnet track has an overall assembly width of 105.0 mm, providing clearance when adjacent guide rails are positioned. When the cover is fitted, the stack height is 14.4 mm, which establishes the minimum gap between the carriage and mounting surface. A magnet way length of 512 mm accommodates movers that traverse mid-stroke distances. The repeating magnetic pattern has a pole pitch of 32 mm, which supports drive commutation and position sensor scaling. The base has 16 tapped holes distributed along its length, allowing the assembly to be secured at every pole pair to maintain flatness under acceleration. Each fixing point has a 7 mm diameter bore that accepts commonly available metric fasteners. The counterbores measure 12 × 5.5 mm, allowing socket heads to sit flush without protruding into the motor air gap. For visual alignment during setup, the pole marks measure 3 × 3 mm and are etched into the assembly.

The mounting holes are arranged on a 64 mm pitch, allowing compatible stanchions or aluminum extrusions to be attached without custom hole drilling. The outermost fasteners have a rail width of 90.0 mm, providing space between the magnet way and adjacent machine components. The protective cover is made from stainless steel, providing a durable barrier against airborne contaminants during continuous operation. Its low-profile form also keeps the cover clear of the moving carriage while protecting the magnetic surface from direct contact.