IC11030A1P1103 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
23 Seconds
The Kollmorgen IC11030A1P1103 is part of the IC Ironcore Direct Drive Motors series and has a coil assembly weight of 2.5 kg with a coil width of 65 mm. This motor delivers a continuous force of 144 Newtons and a peak force of 320 Newtons, and features a continuous current of 4.0 Arms. The IC11030A1P1103 operates with a back EMF constant of 30.9 Vpk per meter per second and a maximum coil temperature of 130 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IC11030A1P1103 coil assembly belongs to the IC Ironcore Direct Drive Motors series produced by Kollmorgen. As an iron-core linear motor section, it supplies direct electromagnetic thrust for high-stiffness positioning stages and removes the need for mechanical transmissions in automation lines. This component pairs with a magnet track to generate linear force, allowing motion platforms to accelerate and settle rapidly under closed-loop servo control. In semiconductor tooling, packaging, or inspection equipment, it acts as the active element that converts drive current from a matched servo amplifier into straight-line motion along the machine axis. Because thrust is produced directly at the stage, the axis avoids backlash and compliance from screws, belts, or gearheads.
Under steady operating conditions, the coil draws 4.0 Arms and delivers a continuous thrust of 144 N. Its force constant is 37.8 N/Arms, so each ampere of drive current produces nearly 38 newtons of linear force. Electrical behavior includes a phase-to-phase resistance of 1.9 ohms line-to-line and an inductance of 16.7 mH line-to-line, which affect drive voltage demand and current ripple. A back EMF constant of 30.9 Vpk/m/s causes generated voltage to rise in proportion to travel speed. The 65.0 mm coil width and 58.3 mm height without the optional cover set the cross-section for machine integration, while the 400 mm flying-lead connector length provides reach toward the cabinet without extra splices.
During rapid indexing, the assembly tolerates 11.3 Arms of peak current and can produce a short-term force of 320 N for acceleration or breakaway demand. The winding temperature limit is 130 °C, and the thermal resistance is 1.64 °C/W, which are useful for sizing the mounting surface or cooling plate. The motor constant of 22.5 N/√W links continuous force to allowable losses, and the magnetic attraction load of 1.4 kN must be supported by the stage bearings. The moving mass is 2.5 kg, which helps keep axis inertia low during fast reciprocating motion.
Frequently Asked Questions about IC11030A1P1103:
Q: What is the continuous force output of the IC11030A1P1103 motor?
A: The IC11030A1P1103 motor can deliver a continuous force of 144 N during standard operation.
Q: What is the maximum peak current rating for the IC11030A1P1103 coil?
A: This motor supports a peak current of up to 11.3 Arms for short bursts.
Q: What is the coil assembly weight for the IC11030A1P1103?
A: The coil assembly of the IC11030A1P1103 weighs 2.5 kg.
Q: What is the maximum allowable coil temperature on the IC11030A1P1103?
A: The maximum coil temperature for the IC11030A1P1103 is rated at 130 °C.
Q: What is the magnetic attraction force produced by the IC11030A1P1103 motor?
A: This model provides a magnetic attraction of 1.4 kN between the coil and magnet track.
