M.1015.8015 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen M.1015.8015 is part of the HSM Brushless Servo Motors series and operates at 230 V motor voltage with a continuous torque of 33.9 Newton-meters and peak torque of 79.1 Newton-meters. The servo motor features a shaft diameter of 35 mm, back EMF constant of 85 V per kRPM, and includes a brake rated at 90 VDC.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The M.1015.8015 is a brushless AC servo motor produced by Kollmorgen within the HSM Brushless Servo Motors series. The model is intended for precision positioning and velocity control in automated machinery such as gantry axes, presses, and packaging stations. Its low-cogging permanent-magnet rotor and high-energy windings convert regulated electrical current into controlled mechanical rotation. The motor mounts through a rigid flange and couples directly to gearboxes or load shafts, providing an electromechanical interface that minimizes transmission losses in demanding industrial applications.
The motor supplies a continuous shaft torque of 33.9 N·m, which it can maintain when the housing remains within its permitted temperature range. During acceleration, it can reach a peak torque of 79.1 N·m, which helps determine the inverter’s momentary current limit. The motor operates from a nominal bus voltage of 230 V and has a back electromotive force of 85 V/kRPM, allowing the connected drive to account for generated voltage as speed increases. Current rise time is governed by a winding inductance of 1.2 mH, while the winding resistance of 0.12 Ω affects copper losses. These electrical values support drive tuning and thermal calculations for the intended duty cycle.
An electromechanical brake powered by 90 VDC holds the shaft when motor power is removed, helping prevent unintended load movement. The rotor inertia is 0.0037 kg·m², supporting rapid acceleration and deceleration without imposing excessive stress on the drive system. With the brake installed, the assembly has an overall length of 482 mm, while the motor body alone measures 429 mm. Heat leaves the stator through a thermal path rated at 0.24 °C/W, which helps determine the required airflow or cooling arrangement. A 35 mm shaft extends 60 mm beyond the flange and includes an M8 × 1.25 thread that is 20 mm deep, providing a secure interface for couplings or puller tools.
Frequently Asked Questions about M.1015.8015:
Q: What is the continuous torque output of the M.1015.8015 servo motor?
A: The M.1015.8015 servo motor has a continuous torque rating of 33.9 N·m.
Q: What motor voltage is required for the Kollmorgen M.1015.8015?
A: This motor requires a supply voltage of 230 V for operation.
Q: What are the shaft diameter and extension specifications for the M.1015.8015?
A: The shaft diameter on this model is 35 mm, with a shaft extension of 60 mm.
Q: What is the brake rotor inertia of the M.1015.8015 brushless servo motor?
A: The brake rotor inertia for this unit is 0.0037 kg·m².
Q: What is the peak torque capability of the Kollmorgen M.1015.8015 servo motor?
A: Peak torque output for this servo motor reaches up to 79.1 N·m.
