H41RCFB-LNK-NS-00 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen H41RCFB-LNK-NS-00 is a hybrid motor from the H Hybrid Motors series, featuring a NEMA 42 frame size with a frame diameter of 4.28 inches and a maximum body length of 5.61 inches. It uses a system MS connector with eight leads and supports 200 steps per revolution at a step angle of 1.8 degrees. The motor has class B insulation rated for 130°C and operates within a temperature range of -20°C to +40°C.
Internal Product Review
The H41RCFB-LNK-NS-00 is a Kollmorgen H Hybrid motor with a NEMA 42 frame size and a 1.8-degree step angle. Class B 130°C insulation and 100 Megohm insulation resistance support dependable electrical performance in demanding motion systems. A smooth shaft and ±1.5% step accuracy make this motor a strong choice for precise indexing applications.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The H41RCFB-LNK-NS-00 is a hybrid stepper motor produced by Kollmorgen as part of the H Hybrid Motors series. The unit translates discrete command pulses from a stepper drive into controlled mechanical rotation, allowing repeatable indexing and holding tasks inside automated assembly fixtures, conveyors, and laboratory instrumentation. Because each command pulse corresponds to a fixed angular movement, the motor is well suited for predictable positioning in machines that rely on repeatable open-loop motion. It can also maintain position at standstill when the drive remains energized, which is useful for feeders, clamps, and transfer mechanisms. Electrical terminations are provided through an eight-lead System MS connector, which supports interchange in modular control panels.
Its mechanical envelope conforms to the NEMA 42 frame standard, with an overall body length of 5.61 in and a circular housing diameter of 4.28 in. The front face uses a 3.000 in bolt circle and threaded holes tapped to #10-32 UNC-2B, while a 4.25 in mounting face and 2.186 in pilot diameter help keep alignment concentric with gearboxes or load flanges. This mounting geometry lets the motor fit adapter plates and machine structures that follow common NEMA patterns. A smooth shaft exits the laminated rotor, and the single-stack, standard construction keeps inertia low for rapid start-stop duty.
Motion resolution is based on a step angle of 1.8 degrees, giving 200 discrete positions per revolution and a linear step accuracy of ±1.5%. This resolution allows a motion controller to use microstepping for smoother velocity profiling without gear reduction. The stator windings use Class B insulation rated to 130 °C, with an insulation resistance of 100 megohms and a working voltage limit of 340 VDC. The motor operates in ambient temperatures from -20 °C to +40 °C without derating, which supports use in temperature-controlled rooms, chilled enclosures, and other indoor industrial environments. That operating range helps maintain consistent behavior in equipment that starts cold or runs in conditioned spaces.
