H32NMFT-LNN-NS-00 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen H32NMFT-LNN-NS-00 stepper motor is part of the H Hybrid Motors series, featuring a NEMA 34 frame size and a holding torque of 463 oz-in. It has a standard construction with a splashproof connection style and weighs 5.3 pounds. The motor provides a step angle of 1.8 degrees, operates with 8 leads, and offers 200 steps per revolution.
Internal Product Review
The H32NMFT-LNN-NS-00 is a Kollmorgen hybrid motor with a NEMA 34 frame size and 463 oz-in holding torque. A 1.8-degree step angle paired with ±1.5% step accuracy supports smooth, dependable positioning in demanding motion-control applications. The max-torque-at-low-speed winding makes the H32NMFT-LNN-NS-00 a strong choice for steady low-speed performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The H32NMFT-LNN-NS-00 is a hybrid stepper motor produced by Kollmorgen within the H Hybrid Motors series. It converts digital pulse trains from an indexer or drive into incremental rotation, allowing automation systems to position loads without closed-loop feedback. The unit follows NEMA mounting conventions for use in packaging machines, pick-and-place axes, and small conveyors.
This motor occupies a NEMA 34 frame and delivers a holding torque of 463 oz-in, providing high detent strength for static load support. Each full step advances the shaft by 1.8 degrees, and the motor completes one revolution in 200 steps, providing predictable positioning for open-loop drives. A low rotor inertia of 0.017 oz-in-s² allows quick acceleration with modest current peaks. The electrical insulation is rated Class B with a thermal limit of 130 °C, and it withstands 340 VDC against the laminated core. Eight leads permit series or parallel connections, and the windings are optimized for maximum torque at low speeds. Step accuracy remains within ±1.5%, which is adequate for motion profiles that use microstepping to refine resolution. The motor has standard construction, a smooth output shaft, and a maximum body length of 4.77 inches for integration with couplings or timing pulleys.
Mechanical loads are accommodated by an axial thrust limit of 180 lb and a radial load limit of 35 lb, protecting the bearings during belt tensioning or vertical thrust applications. Insulation resistance measures 100 megohms to minimize leakage current in humid environments, while an operating range of -20 °C to +40 °C supports use on unconditioned factory floors. The housing mates with a 2.875-inch pilot on a 3.875-inch bolt circle, and four 0.218-inch mounting holes secure the motor to a NEMA faceplate. A splash-proof conduit connector with metric PG11 threads routes cabling to the terminal board while maintaining ingress protection without an external junction box. Two rotor stacks increase torque density, and the motor has a total weight of 5.3 lb.
