D20001-220603B2 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen D20001-220603B2 is part of the Goldline Smart Drives series and is classified as a smart drive. It operates on a main input voltage range of 95 to 254 Vac and can handle either single or three phase input. The drive supports a continuous current per phase of 20 Amps and a peak current of 40 Amps for 2 seconds. It measures 16 inches in height, 5.6 inches in width, and has a weight of 20 pounds.
Internal Product Review
The D20001-220603B2 is a Kollmorgen Smart Drive engineered for dependable motion control at 230 VAC and 20 A continuous current. Support for 1 or 3 phase input and a 15 kHz PWM switching frequency gives the drive strong integration flexibility and clean performance. The 6.7 kW continuous power rating makes the D20001-220603B2 a highly capable choice for demanding servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The D20001-220603B2 belongs to the Goldline Smart Drives series manufactured by Kollmorgen. As a smart drive, it provides closed-loop speed and torque control for servo systems used in industrial automation equipment, including pick-and-place stations and packaging lines. The unit integrates a power supply, reducing the need for external converter modules in the control cabinet. Its cabinet enclosure measures 16 inches high by 5.6 inches wide, allowing the drive to fit into dense rack layouts while leaving space for nearby wiring ducts.
The drive provides a continuous output current of 20 A per phase and can deliver a peak current of 40 A for two seconds when rapid acceleration is required. With a three-phase bus voltage of 230 VAC, it supports 6.7 kW of mechanical output power. The input section accepts a main line voltage from 95 to 254 VAC, allowing the model to operate from compatible single-phase or three-phase feeders. A carrier frequency of 15 kHz reduces audible switching noise while keeping semiconductor losses within the drive’s operating limits. The compensation circuit is referenced to 230 VAC, and the standard compensator setup supports common Kollmorgen motor windings without additional adjustment. Winding selection code B identifies the configured motor winding arrangement. The input demand is 7.9 kVA, providing the power required by the pulse-width modulation stage during rated operation.
During continuous operation, the electronics dissipate 240 W of heat, which is removed by forced airflow through the chassis. The permitted operating temperature ranges from 0 to 45 °C, while storage is permitted between -20 and 70 °C when the drive is not operating. The unit weighs 20 lb, limiting the load placed on cabinet mounting surfaces. Its compact profile supports installation beside other control equipment without requiring an oversized enclosure. Adequate airflow through the chassis allows internal components to remain within their temperature limits during sustained servo operation.
