D20001-220206D2 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen D20001-220206D2 is part of the Goldline Smart Drives series and is a smart drive with standard compensator design and standard hardware. It features a main input voltage range of 95 to 254 VAC, operates with a continuous current per phase of 20 Amps, and supports an input phase of 1 or 3 phase. This drive has a continuous power output of 6.7 kW at 230 VAC 3 phase and a weight of 20 pounds.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The D20001-220206D2 is a Smart Drive produced by Kollmorgen within the Goldline Smart Drives series. It functions as a closed-loop servo amplifier that modulates three-phase power for precise velocity, torque, and position control in automated machinery. An internal power supply removes the need for an external converter and simplifies integration into a machine control system. The enclosure measures 16 inches (406.4 mm) high and 5.6 inches (142 mm) wide. It weighs 20 lb (9.08 kg), allowing it to fit in machine panels without adding excessive mass or occupying an unnecessarily large area.
The drive supplies a continuous phase current of 20 A, which is the maximum steady-state motor current it can support without thermal overload. During short acceleration periods, it can supply up to 40 A for two seconds, providing additional torque for rapid indexing and other transient loads. When connected to a 230 V three-phase supply, the unit provides an output power rating of 6.7 kW. Its apparent power demand from the supply is 7.9 kVA under the stated operating conditions. The pulse-width-modulated output switches at 15 kHz, helping reduce audible motor noise and maintain smooth current regulation. The compensator uses a standard configuration for operation at a compensation voltage of 230 VAC with compatible Goldline servomotors.
The main input range is 95 to 254 VAC, allowing the drive to operate from supported low-voltage industrial power sources without tap changes. The unit accepts single- or three-phase power, which provides flexibility for different machine supply arrangements. Internal power loss is 240 W, so the panel must provide enough ventilation to remove the generated heat during operation. The permitted operating temperature range is 0 to 45 °C, and airflow around the enclosure should remain unobstructed throughout this range. When powered down, the electronics can be stored at temperatures from -20 °C to 70 °C. These storage limits apply to transportation and inactive storage while protecting the drive from temperatures outside its allowable range.
