Product Description:

The D10101-00000000 is a Kollmorgen drive from the Goldline Smart Drives series that regulates current and velocity loops for matched servo motors in industrial automation cells. Kollmorgen classifies it as an intelligent drive rather than a passive power stage. Its onboard control functions support motion coordination while reducing the amount of panel wiring required for external control components.

Each output phase is rated for 10 A, allowing the unit to sustain the electromagnetic load required for continuous production cycles. Its short-term reserve reaches 20 A for two-second acceleration peaks. At 230 VAC, the drive delivers 3.3 kW of output power to the connected motor while drawing 5.7 kVA from the mains, with the difference accounting for semiconductor switching and control electronics. The input section accepts a line voltage of 95 to 254 VAC without requiring tap changes. Pulse-width modulation occurs at 15 kHz, helping to limit current ripple for smooth torque production. The drive uses a standard component configuration and relies on an integral power supply instead of an external DC bus. Cabinet height allocation must accommodate the 16-inch (406.4 mm) chassis while maintaining the necessary clearances for wiring and ventilation.

Internal heat dissipation is rated at 120 W, so forced airflow is recommended when the ambient temperature approaches the specified operating range of 0 to 45 °C. The drive can connect to single-phase or three-phase mains, providing flexibility in facilities with mixed electrical distribution. Its housing measures 5.6 inches (142 mm) wide, which affects available panel space and mounting clearances. The unit weighs 20 lb (9.08 kg), so its mass should be considered when selecting panel rails and mounting hardware. Storage is permitted between -20 °C and 70 °C when the drive is not operating. Adequate spacing around the chassis allows cooling air to carry internally generated heat away from the power electronics.