D03001-103102A2 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The D03001-103102A2 is a smart drive by Kollmorgen that belongs to the Goldline Smart Drives series. It operates with a main input voltage range of 95 to 254 VAC, supports 1 or 3 phase input, and provides a continuous power output of 1 kW at 230 VAC. The unit delivers a continuous current per phase of 3 Amps, reaches a peak current of 6 Amps, and weighs 14 pounds.
Internal Product Review
The D03001-103102A2 is a Kollmorgen Goldline Smart Drive built for precise motion control with 3 A continuous current per phase and 6 A peak current for 2 seconds. Support for 1 or 3 phase input and a 95 to 254 Vac main input range makes integration straightforward across varied machine power architectures. A 15 kHz PWM switching frequency stands out as a strong performance detail for smooth, responsive drive operation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The D03001-103102A2 is a servo controller produced by Kollmorgen within the Goldline Smart Drives series. Designed as a smart drive for the B-102 motor family, it regulates current and voltage to match motion profiles demanded by industrial positioning systems, conveyors, and packaging equipment. By converting single- or three-phase mains power into a modulated output, the unit closes the torque loop at the drive instead of the PLC, simplifying machine integration. Its internal power supply allows stand-alone installation in a control cabinet and reduces the need for separate power components. This arrangement supports compact machine layouts while keeping motor regulation close to the controlled axis.
Input flexibility is provided by a main line range of 95 to 254 VAC, so the drive can operate on either 120 V or 230 V plant power without tap changes. Continuous output current is factory-set to 3 A per phase, and this configured value determines the thermal requirements and sizing of external protection devices. A carrier frequency of 15 kHz governs the PWM bridge, reducing audible noise and increasing current resolution during torque transitions. For short acceleration periods, the current loop permits 6 A for two seconds, supplying additional motor torque without triggering overtemperature limits. Internally dissipated power is limited to 37 W, indicating the amount of heat that enclosure airflow must remove when the drive operates at its rated load. Adequate cabinet ventilation helps prevent accumulated heat from affecting nearby control components.
Continuous mechanical output reaches 1 kW when the drive is supplied from 230 V mains, making it suitable for mid-frame servomotors in pick-and-place systems or indexing tables. The electronics remain functional from 0 to 45 °C, and storage is permitted at temperatures as low as -20 °C. A rigid housing helps control vibration, while the assembly weighs 14 lb (6.36 kg) and stands 14 inches tall, requiring sufficient vertical panel clearance. Its compact width of 4.65 in (118 mm) allows multiple axes to be mounted side by side on a suitable rail or backplate. Standard hardware and a compensator tuned for 115 VAC operation work with winding A to complete the baseline configuration. The housing dimensions also allow access to wiring and ventilation paths when adjacent controllers are installed with the required spacing.
