E34HLHT LNK-NS-00 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen E34HLHT LNK-NS-00 is a hybrid stepper motor from the E Hybrid Stepper Motors series with a NEMA 34 frame size and heavy duty mounting style. It features a holding torque of 8.76 Nm, operates at a rated current per phase of 5.2 A, and utilizes SIGMAX construction. The motor offers 200 steps per revolution with a step accuracy of ±1.5 percent and weighs 4.40 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The E34HLHT LNK-NS-00 hybrid stepper motor is manufactured by Kollmorgen within the E Hybrid Stepper Motors series. This device combines permanent-magnet and variable-reluctance technologies to generate discrete rotor positions, making it suitable for pick-and-place heads, labelers, and small gantries that need accurate open-loop motion control. By producing full-step increments directly from drive pulses, the unit provides repeatable positioning without requiring closed-loop feedback.
The mechanical envelope follows the NEMA 34 frame standard and mounts through a heavy-duty face, while a smooth shaft transmits up to 8.76 Nm of holding torque when the coils are energized. Electrical input is arranged as a four-lead parallel winding that draws 5.2 A per phase. The low-resistance copper path measures 0.71 Ω, and an inductance of 8.7 mH enables rapid current rise for strong torque at low speeds. Each electrical step advances the rotor by 1.8 degrees, providing 200 full steps per revolution with a step accuracy of ±1.5%. A splash-proof conduit connector routes the conductors to a terminal board through a 1/2-inch NPS thread, supporting field wiring in damp environments.
The four-stack SIGMAX design increases axial stiffness, allowing the rotor to sustain an end thrust of 801 N and a radial load of 427 N without bearing damage. Thermal management is supported by a Class B insulation system rated for 130 °C, which operates with a thermal resistance of 1.7 °C/W and an insulation voltage limit of 340 VDC. Insulation resistance is rated at 100 MΩ to limit electrical leakage. The motor operates from -20 °C to +40 °C and weighs 4.40 kg, providing enough mass to damp vibration while remaining suitable for mounting on machine frames. Rotor inertia is 0.035 oz-in-s², which supports responsive acceleration and controlled starts during repetitive motion.
