E32NLHP-LNN-NS-00 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen E32NLHP-LNN-NS-00 is a stepper motor from the E Hybrid Stepper Motors series with a NEMA 34 frame size and SIGMAX construction. It delivers a holding torque of 4.75 Nm, supports a rated current of 8.1 A per phase, and weighs 2.40 kg. The motor features a smooth shaft, splashproof connection style, and operates at a step angle of 1.8 degrees with 200 steps per revolution.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The E32NLHP-LNN-NS-00 is a hybrid stepper motor produced by Kollmorgen within the E Hybrid Stepper Motors series. Built on a NEMA 34 frame, this two-stack device delivers incremental motion for indexing tables, pick-and-place axes, and other positioning tasks in industrial automation. SIGMAX construction concentrates magnetic flux so each commanded step is repeatable, while the smooth shaft simplifies direct coupling to lead screws or pulleys without keys. The motor’s compact industrial design supports controlled acceleration and precise stopping when paired with a compatible bipolar stepper drive.
The motor provides a holding torque of 4.75 Nm, giving the axis resistance to back-driving when powered. Each phase is energized at 8.1 A and has a resistance of 0.19 ohms, allowing rapid current rise for full torque during startup. The inductance of 2.2 mH further reduces electrical time constants, supporting microstepping at high pulse rates. A step angle of 1.8 degrees produces 200 steps per revolution, giving predictable displacement that can be subdivided by the drive. A rotor inertia of 0.0170 oz-in-s² and a winding optimized for maximum torque at high speed balance acceleration with upper-range speed. Thermal resistance is 2.7 °C/W, so enclosure airflow or heat sinking can be calculated for continuous operation below the 130 °C Class B insulation limit. Under axial loading, the shaft withstands 801 N without exceeding its permitted load.
Step accuracy is maintained within ±1.5%, minimizing positional error over long motion sequences. The bearings withstand a radial load of 156 N, which supports belt drives and gear engagements. Rated service spans -20 °C to +40 °C, making the motor suitable for typical industrial control environments. The unit weighs 2.40 kg, reducing the load added to gantries and other moving assemblies. Splash-resistant wiring is routed through a 1/2-inch NPS conduit connector to a terminal board, and the four-lead parallel arrangement supports bipolar drives. The insulation resistance is 100 MΩ at 340 V DC, and the housing has an overall length of 121.2 mm. Its NEMA mounting face fits established brackets without requiring a custom mounting plate.
