Product Description:

The DBL5N01350-0R2-00K-S40 is a brushless servo motor produced by Kollmorgen in the DBL Synchronous Servomotors series. The unit converts electrical drive commands into controlled shaft rotation for positioning or velocity tasks in automated machinery, conveyors, or packaging stations. As a synchronous design, it maintains precise electrical angle alignment between the stator field and rotor magnets, giving the drive system the tight speed regulation needed in industrial motion applications.

Its square flange measures 142 mm, allowing direct mounting to gearboxes or machine frames without additional adapter plates. Position feedback is generated by a Resolver, which supplies analog sine-cosine signals that remain tolerant to dust and vibration. The motor can operate in ambient air from 5 °C to 40 °C, and within that range the windings stay inside their thermal class limits. An enclosure rating of IP54 helps protect the motor against harmful dust deposits and water spray, so it can be used outside a sealed cabinet in suitable installations. The motor uses a 2-pole configuration, which supports higher base speed for applications that require fast cycle times while keeping torque ripple low.

The unit tolerates up to 95% rel. humidity without internal condensation, and it is supplied without a holding brake, so static load retention must be provided externally when required. The shaft is supplied with keyway, which simplifies coupling to pulleys or rigid hubs and helps prevent slippage during rapid acceleration. Power and signal terminations are routed through angled B-side connectors, reducing installation depth while protecting contact surfaces at the feedback connection. This layout supports compact machine designs where cable routing space is limited and access around the motor body must remain clear.