Product Description:

Kollmorgen manufactures the DBL3N00130-03S-000-S40 as part of its DBL Synchronous Servomotors series. The product is a brushless servo motor used to deliver commanded rotary motion for indexing tables, pick-and-place heads, and light mechanical axes within automated machinery. In these roles, it converts controlled three-phase current from a drive into repeatable torque and speed while preserving the compact dimensions required in modern equipment.

At the shaft, the motor sustains a standstill torque of 1.3 Nm, so it can hold loads such as small timing belts or lead-screw nut assemblies without movement when energized. Its mounting interface uses a square flange measuring 75 mm, allowing a direct fit with standardized planetary gearboxes commonly used in tight spaces. The motor has an ingress protection rating of IP54; dust deposits are minimized, and splashing liquid does not reach live parts when the feedback connector cover is engaged. Safe operation is permitted at ambient temperatures from 5 to +40 °C, and the motor can operate at up to 95 % relative humidity when condensation is prevented. A contact guard at the feedback connector adds a physical barrier, while encoder feedback provides high-resolution data for closed-loop control.

Electrical power, signal, and feedback lines terminate through connectors, simplifying cable disconnection in modular machine frames. All plugs are angled toward the B-side, so the cables run along the housing and remain clear of adjacent axes. Absolute position information for one revolution is provided by the single-turn encoder, which suits systems that perform a homing sequence at startup. Because the motor is supplied without a holding brake, external clamping or sustained drive torque must secure vertical loads during shutdown. The configuration also includes a standard-speed winding, a smooth shaft, a standard motor length, and a standard option set.