Product Description:

The DBL3M00190-03M-000-S40 is a brushless servo motor produced by Kollmorgen and assigned to the DBL Synchronous Servomotors series. It converts drive current into rotational motion that can be regulated for indexing tables, gantry axes, or other motion points that require repeatable accuracy. By combining a permanent-magnet rotor with electronic commutation, the motor provides fast response and continuous-duty performance for closed-loop industrial automation.

This model is built with field-wired connectors rather than a fixed cable, which helps simplify installation inside compact machinery. A protection rating of IP54 shields the housing from limited dust ingress and water spray, allowing mounting near the load without a separate enclosure. The motor attaches through a 75 mm square flange and transmits torque through a smooth shaft, which suits couplings or timing pulleys that do not require a keyway. Position and velocity feedback are supplied by an internal encoder, and the signal lines exit at an angle on the B-side so cable bends stay outside the working envelope. The motor uses a standard length format and does not include a holding brake, so passive load holding must be provided by the machine when power is removed.

The operating range allows ambient temperatures from 5 °C to +40 °C and airborne moisture up to 95% relative humidity, which supports use on factory floors that are conditioned but not climate-controlled. Feedback with multiturn feedback returns absolute position over multiple revolutions, which removes the need for homing after power loss. The winding is optimized for medium-speed operation, allowing the motor to deliver rated torque across a broad duty cycle without excessive current demand. A contact cover over the feedback connector and the angled termination layout help protect the interfaces during handling and installation.