DBL3H00250-QR2-000-S40
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The DBL3H00250-QR2-000-S40, part of Kollmorgen's DBL Synchronous Servomotors, operates with a rated power of 0.69 kW at 230V and 1.13 kW at 400V. It delivers a rated torque of 2.2 Nm at 230V and 1.8 Nm at 400V. The motor weighs 3.2 kilograms and can handle a maximum axial load of 85 Newtons.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DBL3H00250-QR2-000-S40 Servo Motor from the DBL series is designed and manufactured by Kollmorgen. It delivers consistent performance and operates effectively within a broad voltage range. This motor is designed for durability and long term industrial use.
The DBL3H00250-QR2-000-S40 servo motor supports a mains voltage range between 230 VAC and 480 VAC. At 230V, it delivers a rated torque of 2.2 Nm with a rated current of 2.7 A and operates at 3000 min⁻¹. At 400V, the motor provides a rated torque of 1.8 Nm consuming 2.3 A and yields a rated power output of 1.13 kW. The peak current capacity reaches up to 13 A. The winding inductance is measured at 11.7 mH and the voltage constant is 87 mV/min. It exhibits a static friction torque of 0.05 Nm. The thermal time constant of the motor is rated at 22 minutes which ensures thermal stability during operation. This motor can endure axial loads up to a maximum of 85 N. It supports continuous operation and is built for sustained performance with controlled heating behavior especially when mounted on an adapter flange maintaining + 65 °C.
The DBL3H00250-QR2-000-S40 servo motor has specific derating guidelines based on temperature and altitude. The motor works perfectly fine when used between 40 °C to 50 °C under 1000 MSL, with 1% reduction in rated data. However, the rated data efficiency reduces by 6% when it is used at 2000 MSL and it declines gradually with the further increase in altitude. However, no derating is necessary for sites above 1000 m if the temperature is reduced by 10 K per 1000 m increase in elevation. Get this servo unit now from Wake Industrial.
Frequently Asked Questions about DBL3H00250-QR2-000-S40:
Q: Can DBL3H00250-QR2-000-S40 handle stable output under high axial stress?
A: Yes, this motor can endure axial loads up to 85 N without performance drop. It remains reliable in tough setups that demand continuous load stability.
Q: Will the DBL3H00250-QR2-000-S40 servo motor maintain thermal balance in long operations?
A: The motor has a thermal time constant of 22 minutes that ensures thermal control. It supports continuous cycles while maintaining heat efficiency on an adapter flange at +65 °C.
Q: How does DBL3H00250-QR2-000-S40 behave under different voltage conditions?
A: It operates at 230 VAC with 2.2 Nm torque and at 400 VAC with 1.8 Nm torque. The rated power peaks at 1.13 kW with voltage flexibility.
Q: Is power performance affected by high elevation for DBL3H00250-QR2-000-S40?
A: Yes, power derates by 6% up to 2000 m and 17% up to 3000 m. Derating continues unless ambient temperature drops by 10 K per 1000 m above 1000 m.
Q: Can DBL3H00250-QR2-000-S40 manage transient loads effectively?
A: Yes, the motor supports a peak current of up to 13 A for transient demands. It handles sudden surges without instability or loss in torque performance.
