Product Description:

The DBL3H00250-013M000000000-0042 is a brushless servo motor manufactured by Kollmorgen for the DBL Synchronous Servomotors series. It serves as a compact, closed-loop rotary actuator that delivers precise torque and velocity in packaging lines, electronic assembly stations, and material-handling axes. Electronic commutation eliminates brush wear, while integrated position feedback allows a compatible drive to maintain tight positional accuracy. This arrangement supports controlled acceleration, steady speed regulation, and repeatable positioning in industrial automation.

A mounting flange of 75 mm allows direct attachment to IEC gearheads and machine frames without spacers. Power, signal, and feedback lines terminate at sealed connectors, so the motor can be installed without opening the housing. The rotor has a smooth shaft, simplifying the use of clamping couplings where backlash must be minimized. Because the unit is supplied without a holding brake, static load retention must be provided by an external clamp or by motor torque from the drive. The motor body has a standard-length configuration, balancing continuous torque capability with a compact axial profile for crowded machinery.

The permitted ambient temperature range is +5 to +40 °C, supporting installation inside most cabinets or on open machine frames without special climate control. The housing tolerates up to 95% relative humidity when condensation is prevented, making the motor suitable for moist production areas. A high-speed winding has lower electrical inductance, enabling rapid acceleration and a higher base speed when paired with the correct inverter. The cable exits are angled toward side B, routing the harness away from the driven load and reducing strain in confined installations. Proper airflow and adequate clearance around the housing help preserve heat dissipation during continuous operation.