DBL3H00130-0R2-000-S40 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen DBL3H00130-0R2-000-S40 is a brushless servo motor in the DBL Synchronous Servomotors series with a 75 mm flange size and smooth shaft design. It features a high speed winding variant, resolver feedback type, and provides a standstill torque of 1.3 Nm. The motor supports connector type connections, operates in ambient temperatures from 5 to 40°C, and has IP54 protection class.
Internal Product Review
The DBL3H00130-0R2-000-S40 is a Kollmorgen brushless servo motor with resolver feedback and a high-speed winding variant. IP54 protection and 1.3 Nm standstill torque make the motor a strong choice for dependable motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DBL3H00130-0R2-000-S40 servo motor is produced by Kollmorgen for the DBL Synchronous Servomotors series. It is a brushless rotary unit intended to deliver precise torque and velocity control to automated machinery such as light pick-and-place axes, compact conveyors, or small indexing stations across repeated motion cycles. A standard-length housing and connectors angled toward side B simplify cabinet wiring while keeping the motor footprint compact. The motor uses a smooth shaft interface, allowing couplings or pulleys to be mounted without a keyway and aligned through a clamping hub.
A continuous standstill torque of 1.3 Nm lets the motor hold loads without movement when commanded at zero speed. The square mounting interface follows a 75 mm flange pattern, allowing direct attachment to matching gearheads or machine frames. A two-pole rotor design supports higher base speeds by reducing electrical frequency requirements. Position information is supplied by a wound-stator resolver, which tolerates shock, vibration, and temperature variation better than many electronic encoders. Ingress protection is rated at IP54; dust ingress is limited, and the housing resists splashed water, so the unit can be installed in typical factory environments without secondary enclosures.
The allowable conditions include an ambient temperature range of 5 to +40 °C and a maximum relative humidity of 95%, with no condensation during continuous operation. The high-speed winding favors rapid acceleration in applications where short cycle times are critical. Because the motor is supplied without a holding brake, any vertical load axis must use external mechanical locking or closed-loop torque to secure its position during a power loss. The feedback connector includes contact protection for reliable signal connections, and the motor uses the standard option set.
