Product Description:

The DBL2H00080-0002000000000-104246 is a brushless servo motor manufactured by Kollmorgen for the DBL Synchronous Servomotors series. As a compact drive element, it converts electrical energy from a servo amplifier into precisely controlled rotary motion for positioning axes and continuous-duty automation tasks in packaging, pick-and-place, and general factory equipment. The motor uses a standard mechanical outline, allowing it to be paired with Kollmorgen AKD or similar drives without requiring mechanical modifications.

The motor supports continuous operation from +5 to +40 °C, an ambient temperature range that helps preserve the service life of the winding insulation and bearing grease. A 55 mm square mounting flange aligns with common gearboxes while maintaining a compact footprint. Power and feedback are routed through plug-in connectors, eliminating the need to terminate fixed pigtails during installation. The cables exit at an angle toward the B-side, preventing sharp bends when the motor is installed near a back panel. The motor is supplied without a holding brake, so static loads must be held by drive-applied torque or an external clamp. Its standard configuration does not add customized seals or feedback hardware.

A high-speed winding supports elevated base frequencies and a higher top speed when paired with a suitable inverter. Output torque is delivered through a smooth shaft, allowing a backlash-free connection with compression hubs. The laminated stack uses a standard-length construction that balances rotor inertia and torque density for quick indexing movements. This arrangement supports responsive acceleration in compact positioning systems without adding unnecessary axial length. Sealed components can operate in ambient air with up to 95% relative humidity, provided condensation does not occur. The compact flange and angled cable routing also help the motor fit into space-restricted machine layouts where clearance around the drive axis is limited.