Product Description:

The DBL2H00040-03S-SS0-P40 belongs to the DBL Synchronous Servomotors series manufactured by Kollmorgen. It is a brushless servo motor intended for closed-loop positioning or speed regulation in industrial automation where compact electromechanical drives are required. By combining a permanent-magnet rotor with electronic commutation, the unit delivers repeatable torque and quick response that suit pick-and-place axes, small material-handling gantries, and packaging stations.

The motor mounts to machinery through a 55 mm square flange, providing a standardized interface for gearheads or direct couplings. An enclosure rating of IP54 shields internal stator windings from limited dust ingress and water splashes, so the device can run on the factory floor without a sealed cabinet. It is rated for ambient temperatures from +5 to +40 °C; staying within that thermal range helps prevent magnet demagnetization and lubricating grease breakdown. Operation is also permitted at up to 95% relative humidity, allowing use in humid process environments when condensation is avoided. Rotor position is returned to the drive through an integrated encoder, enabling high-bandwidth current loops and accurate microstepping. The motor has a high-speed winding, so the back-EMF constant is matched to drives that deliver elevated frequencies for rapid cycle times.

The motor is delivered without a holding brake, meaning static load retention must rely on drive torque or an external clamp when power is removed. A smooth shaft simplifies cleaning and suits friction couplings instead of keyed hubs. Thermal monitoring is handled by a PTC at the feedback connector; this sensor initiates a drive shutdown if the stator temperature approaches a critical limit. The motor uses the standard housing length for this model configuration. Its single-turn feedback provides absolute position information within one complete 360-degree mechanical revolution.