LE06565-AG Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen LE06565-AG is a drive from the CD Servostar CD Drives series and weighs 2.22 kg. It features a SynqNet control interface and supports Goldline B, M, and EB motor series. The drive operates with a rated current of 6 Amps and has an encoder feedback system.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The LE06565-AG is a digital servo drive produced by Kollmorgen as part of the CD Servostar CD Drives series. The module conditions a 300 V DC bus for brushless motors and coordinates motion profiles over factory networks. It actuates Goldline B, M, and EB servomotors in automated assembly, packaging, and material-handling axes, converting control commands into phase-modulated currents that regulate torque and velocity. With a compact footprint measuring 256.0 mm in height, 83.3 mm in width, and 163.0 mm in depth, it fits into crowded control enclosures without requiring additional cooling hardware.
The drive communicates through the SynqNet deterministic interface, so position loops close across multiple axes with submillisecond latency. A power stage rated at 300 V DC switches devices at 8 kHz; this frequency balances switching losses with current ripple suitable for low-inductance windings. Torque commands refresh at 16 kHz, allowing controlled force adjustments during fast indexing. Continuous output is limited to 6 A RMS, which indicates the thermal load that the heat sink must dissipate through convection. The encoder feedback channel supports incremental or absolute transducers, and measured position data feed the current regulator that generates three-phase pulse-width modulation patterns. During steady motion, the drive dissipates 80 W, an important consideration when determining cabinet ventilation requirements.
Protective thresholds safeguard both the drive and connected machinery. An overtemperature sensor disables the gate drive at 80 °C to prevent damage to semiconductor components, while the DC bus trips at 430 VDC to protect capacitors from excessive voltage during regenerative events. Control electronics draw power from a 24 VDC logic rail, allowing the network link to remain active when the main bus is de-energized. Line protection is provided by a 15 A main fuse that interrupts fault current before it can propagate upstream. The aluminum housing weighs 2.22 kg, which should be considered when the drive is mounted on a panel door alongside other Servostar modules.
