CE06200 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
The CE06200 is a compact drive from Kollmorgen, featured in the CD Servostar CD Drives series. This single-phase drive has a rated current of 6 Amps and a peak current of 18 Amps RMS per phase for 500 milliseconds. The device measures 256.0 mm in height, 83.3 mm in width, and 163.0 mm in depth, with an internal heat dissipation of 80 Watts.
Internal Product Review
The CE06200 is a Kollmorgen compact servo drive featuring single-phase input and encoder feedback. A 62.5 µs current loop update paired with 8 kHz PWM frequency gives the CE06200 notably crisp current regulation and stable motion response. A 06 Amp rated current with 12 A RMS/phase peak current for 2 s makes the CE06200 a strong compact axis-control solution.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CE06200 is a servo drive manufactured by Kollmorgen for the CD Servostar CD Drives series. It supplies regulated power to brushless servo motors used in material-handling cells, indexing tables, and automated packaging lines. Encoder feedback is processed internally, so the drive can close velocity and position loops without external cards. This arrangement supports precise starts, stops, and position changes in compact automated equipment. The drive is intended for installations where motor control, feedback processing, and compact mounting need to be combined in one unit. Cabinet installation is supported by its 83.3 mm width, 163.0 mm depth, 256.0 mm height, 2.22 kg mass, and single-phase input for standard plant mains.
Current regulation updates every 62.5 µs, helping keep phase error small when load torque changes suddenly. The power stage switches at an 8 kHz PWM rate, which balances acoustic noise with switching loss. Under continuous duty, the drive can supply a phase current of 6 A. For short overloads, it delivers 12 A RMS/phase for two seconds or 18 A RMS/phase for 500 milliseconds. These short-time overload levels support rapid acceleration when the driven load has significant inertia. Fast current updates and set overload intervals help the drive respond quickly during speed changes and repeated indexing moves.
DC-bus monitoring trips the unit at 430 VDC to protect the transistors from line surges, and automatic restart is inhibited when bus voltage falls below 90 VDC so brownout recovery does not produce uncontrolled motion. Thermal limits are managed by restricting internal dissipation to 80 W, which helps determine the airflow required around adjacent equipment. A sensor near the power devices initiates shutdown at an overtemperature threshold of 80 °C, helping prevent solder fatigue and dielectric breakdown during sustained peak duty. The drive also uses a 15 A line-side fuse rating for upstream protection. These protection functions act on the power stage directly instead of relying on separate external protection cards.
