C044A-13-3305 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
41 Seconds
The Kollmorgen C044A-13-3305 is a direct drive rotary motor from the Cartridge DDR Motors series. It features a continuous stall torque of 14.1 Newton-meters and a rated power of 1447 Watts. The motor operates with a 240 VAC supply voltage, includes no bearing, and uses a BiSS feedback interface with a split ring coupling, keyed shaft.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The C044A-13-3305 is a frameless direct-drive rotary motor supplied by Kollmorgen within the Cartridge DDR Motors series. Its cartridge architecture lets the stator and rotor clamp around a machine hub, and because the unit is supplied without integrated bearings, the host assembly provides radial support. By sending torque through a split ring coupling and keyed shaft, it serves as the primary actuator for indexers, rotary tables, and other precision axes where zero-backlash motion improves throughput and accuracy. This frameless layout also helps keep the motor package compact around the axis while leaving bearing arrangement and structural stiffness to the machine design.
Electrical ratings begin with a line supply of 240 VAC, matching common servo drives while keeping insulation demands moderate. With that supply, the motor can deliver a continuous stall load of 14.1 N·m while drawing only 5 Arms, and these steady-state limits set thermal sizing for cables and power electronics. During rotation, the windings generate a back electromotive force of 173 Vrms/kRPM, which the drive must overcome to accelerate or decelerate the rotor. A torque constant of 2.85 N·m/Arms links commanded phase current to output torque, simplifying current-mode control and supporting fine position regulation. These continuous electrical values are especially important in rotary axes that spend long periods holding position or moving at low speed, where heat buildup can limit performance.
For short duty cycles, the motor reaches a peak stall capability of 38.1 N·m with currents up to 15 Arms, giving extra headroom for rapid indexing or disturbance rejection. The phase inductance of 22.1 mH smooths current transitions and limits ripple that could otherwise excite structural resonances. A low rotor inertia of 0.00149 kg·m² supports high acceleration without excessive drive effort, while the 4.08 Ω DC resistance constrains fault currents and eases thermal management. This combination helps the motor respond quickly to changing commands in repeated start-stop cycles. Sealed construction blocks coolant or process debris from entering the windings, which helps protect the active components in demanding machine environments.
Frequently Asked Questions about C044A-13-3305:
Q: What is the continuous stall torque of the C044A-13-3305 motor?
A: The continuous stall torque produced by this motor is 14.1 N·m.
Q: Which feedback interface does the C044A-13-3305 use?
A: The feedback interface on this model is BiSS.
Q: Does the C044A-13-3305 motor come equipped with bearings?
A: This motor is manufactured without internal bearings.
Q: What is the rated power of the C044A-13-3305 motor?
A: The rated power output for this model is 1447 W.
Q: What supply voltage does the C044A-13-3305 require?
A: This unit operates at a supply voltage of 240 VAC.
