BDS5A-220-00010-404C-2-030 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen BDS5A-220-00010-404C-2-030 is an industrial servo drive in the BDS Industrial Servo Drives series, supporting a voltage rating of 230 VAC and an RS-232 communication interface. This drive has a continuous output current of 20.0 Amps RMS per phase and a peak output current of 40.0 Amps for 2 seconds, with a main DC bus voltage range from 130 to 225 VDC. It features 32 I/O capacity and an encoder input, as well as a resolver with 12-bit resolution and 8 arc minute accuracy.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The BDS5A-220-00010-404C-2-030 is an AC servo drive produced by Kollmorgen for the BDS Industrial Servo Drives series. Designed for industrial automation, the drive conditions incoming mains power and delivers phase-balanced current to synchronous or brushed motors so that external controllers can impose rapid speed or position changes without mechanical relays. By combining power conversion, feedback processing, and serial communications, it serves as the electrical interface that ties machine logic to rotary motion on indexing tables, feeder tracks, and material handling equipment.
Continuous motor power is supported by an output of 20.0 A RMS per phase, while short bursts of up to 40.0 A RMS for 2.0 seconds handle acceleration or sudden load changes. To limit harmonic content, the current ripple is filtered at 20 kHz, and torque is modulated with a PWM carrier of 10 kHz. The internal bus can rise to 225 VDC, providing operating margin when the supply is at its upper tolerance. RS-232 communication allows parameter downloads and status reporting, and a resolver-to-digital converter samples shaft position with an accuracy of 8 arc-minutes. The drive also excites the resolver at 8.5 kHz so feedback remains synchronized with the control loops.
Operational flexibility is increased by a main DC bus that can drop to 130 VDC without tripping, allowing the system to ride through moderate line dips before shutdown. The nominal mains interface is rated at 230 VAC, and an onboard fan drawing 0.2 A at 115 VAC removes switching heat to maintain semiconductor operating margins. Up to 32 I/O points are available for limit switches, enables, and fault contacts, and an encoder input permits incremental feedback sources to coexist with the resolver channel. Position tracking uses a resolution of 12 bits with 4,096 counts per revolution, providing adequate resolution for moderate-precision axes while keeping data rates low.
