BDS5A-106-41010\03011A2-030 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen BDS5A-106-41010\03011A2-030 is part of the BDS Industrial Servo Drives series and features a continuous output current of 6.0 Amps with peak output current of 12.0 Amps. It operates with a voltage rating of 115 VAC and a continuous output power of 1.2 kVA. The drive measures 340 mm in height, 76 mm in width, and 280 mm in depth.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The BDS5A-106-41010\03011A2-030 is a single-axis servo drive developed by Kollmorgen for the BDS Industrial Servo Drives series. Intended for use with brushless servomotors and resolver feedback, the unit converts fixed-frequency mains power into controlled DC power and modulated phase currents that regulate speed and torque in automated machinery, including pick-and-place stations, conveyors, and indexing tables. The drive connects to a 115 VAC supply and operates as the power stage between the motion controller and motor, providing dynamic response and stall protection in industrial automation applications.
Under continuous load, the drive can supply 6.0 A of phase current and provide a steady apparent power output of 1.2 kVA. Current ripple is limited by a carrier frequency of 20.0 kHz, so the motor windings experience minimal torque pulsation at low speeds. The internal DC link accepts up to 225 VDC, providing headroom for regenerative energy without triggering overvoltage faults. During short acceleration periods, the current ceiling rises to 12.0 A, allowing rapid torque changes without exceeding the drive’s thermal limits.
Peak apparent power reaches 2.4 kVA, which is the maximum electrical load that the output bridge can tolerate during acceleration or shock loading. The IGBT inverter switches at 10.0 kHz, balancing switching losses with audible noise. The bus remains energized down to 130 VDC, preserving control during input voltage reductions. The enclosure has a width of 76 mm, a depth of 280 mm, and a height of 340 mm, allowing installation in industrial control cabinets. Internal heat dissipation is 40 W, so the cabinet must provide adequate airflow around the drive. The input form factor does not exceed 1.01, supporting stable operation from the connected AC source. Resolver excitation operates at 8.5 kHz to provide accurate rotor position feedback for closed-loop motor control.
